Zum Hauptinhalt wechseln
  1. Use a Y000 driver to remove the tri-point screw securing the metal cover plate. Use a pair of tweezers to remove the cover plate. First open the plate all the way to unhinge the two flaps.
    • Use a Y000 driver to remove the tri-point screw securing the metal cover plate.

    • Use a pair of tweezers to remove the cover plate.

    • First open the plate all the way to unhinge the two flaps.

    • Then close it halfway to remove it completely by lifting it out.

  2. On the GPS-only version it is possible to disconnect the battery immediately. For the cellular/LTE version, you need to disconnect the Force Touch gasket and fold it out of the way first, in order to disconnect the battery. Disconnect the battery by prying its connector straight up. Bend the connector up slightly to make sure it does not make contact by accident.
    • On the GPS-only version it is possible to disconnect the battery immediately. For the cellular/LTE version, you need to disconnect the Force Touch gasket and fold it out of the way first, in order to disconnect the battery.

    • Disconnect the battery by prying its connector straight up.

    • Bend the connector up slightly to make sure it does not make contact by accident.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tobias Isakeit

Mitglied seit: 31.03.2014

90.997 Reputation

173 Anleitungen geschrieben

Team

iFixit Mitglied von iFixit

Community

138 Mitglieder

16.981 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 2

Insgesamt: 66