Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Einleitung

Use this guide to remove the rear lens cover of your LG V20.

  1. Press the button on the lower right side of the LG V20 to open the clamp that holds the back cover on the back side of the phone. Remove the back cover. Remove the back cover.
    • Press the button on the lower right side of the LG V20 to open the clamp that holds the back cover on the back side of the phone.

    • Remove the back cover.

  2. Before disassembling your phone, discharge the battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured. Use the flat end of a spudger and insert it in the small recess at the lower end of the battery. Use the spudger to lever out the battery and remove it.
    • Before disassembling your phone, discharge the battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Use the flat end of a spudger and insert it in the small recess at the lower end of the battery.

    • Use the spudger to lever out the battery and remove it.

    • You can do this with your fingers but take care not to puncture the battery with your fingernails.

  3. Nintendo Switch Kits

    Eine schnelle Lösung, um wieder ins Spiel zu kommen

    Switch Kits kaufen

    Nintendo Switch Kits

    Eine schnelle Lösung, um wieder ins Spiel zu kommen

    Switch Kits kaufen
  4. Use an iOpener to loosen the adhesive beneath the rear lens cover.
  5. Use the tip of an opening pick to gently pry up the rear lens cover. Use the tip of the opening pick and slide around the whole rear lens cover to cut the adhesive beneath. Use the tip of the opening pick and slide around the whole rear lens cover to cut the adhesive beneath.
    • Use the tip of an opening pick to gently pry up the rear lens cover.

    • Use the tip of the opening pick and slide around the whole rear lens cover to cut the adhesive beneath.

  6. Remove the rear lens cover.
    • Remove the rear lens cover.

Abschluss

To reassemble your device, follow these instructions in reverse order. Apply new adhesive where it’s necessary.

5 weitere Nutzer haben diese Anleitung absolviert.

Dominik Schnabelrauch

Mitglied seit: 23.11.2016

64.445 Reputation

292 Anleitungen geschrieben

Team

iFixit Mitglied von iFixit

Community

125 Mitglieder

11.800 Anleitungen geschrieben

Need to be careful not to pull the flash bits as well.

David Nevill - Antwort

My rear camera lens cover stack fell off. The flash array, the two cameras and the sensors on the right are in place. The rubber 'rings' around the flash and sensors are gone and everything above them is gone.

How do I get all of the pieces?

Is it called a “lens cover stack" or something like that?

Bill Lipe - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 9

Letzten 30 Tage: 52

Insgesamt: 1,494