Einleitung

You will learn how to remove and install the support spring.

Ersatzteile

Kein Ersatzteil erforderlich.

Hold the mouse in your hand so that the bottom side is facing upward.
  • Hold the mouse in your hand so that the bottom side is facing upward.

  • Locate the #1 screw towards the bottom half of the mouse.

  • Take the 4.76 mm Phillips screwdriver and unscrew the #1 screw that was previously located.

باز کردن پیچ زیر موس

h sh - Antwort

Place the mouse back on the hard surface, with the bottom side touching the hard surface.
  • Place the mouse back on the hard surface, with the bottom side touching the hard surface.

  • Gently, lift up the top cover of the mouse and remove.

جدا کردن قاب رو و زیر موس

h sh - Antwort

  • Locate the scroll wheel on the mouse.

  • Grab the scroll wheel with your thumb and index finger.

  • Gently lift up to remove the scroll wheel from the mouse.

خارج کردن چرخ اسکرول موس

h sh - Antwort

  • Locate the spring on the scroll wheel. The spring looks like a small, metal piece of wire, coiled up in the middle.

  • Very carefully, remove the spring from the wheel scroll.

نحوه قرارگیری فنر سمت راست چرخ اسکرول

h sh - Antwort

  • Replace the spring making sure it is placed on the right side of the wheel with the prongs pointing down.

  • The right side is the side without the black plastic square as shown in the photos.

نحوه قرارگیری فنر سمت راست چرخ اسکرول

h sh - Antwort

Abschluss

To reassemble your device, follow these instructions in reverse order.

4 weitere Nutzer haben diese Anleitung absolviert.

Conor Whatley

Mitglied seit 11.01.2013

297 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team 5-14, Forte Winter 2013 Mitglied von Cal Poly, Team 5-14, Forte Winter 2013

CPSU-FORTE-W13S5G14

5 Mitglieder

7 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 4

Letzte 7 Tage: 17

Letzte 30 Tage: 48

Insgesamt: 2,139