Was du brauchst
-
-
Remove the three 3.7 mm T4 screws securing the metal cover to the AirPort board bay.
-
-
-
-
Use the tip of a spudger to flip the ZIF retaining tab on the fan assembly ribbon cable connector.
-
Remove the fan assembly ribbon cable from its ZIF socket.
-
-
-
Use the tip of a spudger to flip the ZIF retaining tab on the fan ribbon cable.
-
Disconnect the fan ribbon cable.
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.