Einleitung

If you're having sound issues, your speakers may be broken. Follow these steps to replace them.

Ersatzteile

Kein Ersatzteil erforderlich.

Turn the device so the screen is facing down.
  • Turn the device so the screen is facing down.

Kommentar hinzufügen

Slide the battery lock switch next to the power slider to the unlocked position. Slide the battery lock switch next to the power slider to the unlocked position.
  • Slide the battery lock switch next to the power slider to the unlocked position.

Kommentar hinzufügen

Slide and hold the switch by the fan vent to the unlocked position. Firmly grasp the battery and pull away from tablet. When replacing the battery, place the end near the fan vent in first. Make sure to keep the other switch in the unlocked position while pushing the battery into place. When replacing the battery, place the end near the fan vent in first. Make sure to keep the other switch in the unlocked position while pushing the battery into place.
  • Slide and hold the switch by the fan vent to the unlocked position. Firmly grasp the battery and pull away from tablet.

  • When replacing the battery, place the end near the fan vent in first. Make sure to keep the other switch in the unlocked position while pushing the battery into place.

Kommentar hinzufügen

Unscrew hard drive panel using a Phillips head #1 screwdriver.
  • Unscrew hard drive panel using a Phillips head #1 screwdriver.

  • (Our device was not given to us with a hard drive or a hard drive panel)

Kommentar hinzufügen

Pull clear plastic tab to detach hard drive from tablet. Pull clear plastic tab to detach hard drive from tablet. Pull clear plastic tab to detach hard drive from tablet.
  • Pull clear plastic tab to detach hard drive from tablet.

Kommentar hinzufügen

To disconnect the three white ribbon cables on the side closest to the hard drive connector, pull the white plastic tabs. To disconnect the three white ribbon cables on the side closest to the hard drive connector, pull the white plastic tabs.
  • To disconnect the three white ribbon cables on the side closest to the hard drive connector, pull the white plastic tabs.

Kommentar hinzufügen

Pull the brown tabs to disconnect the white ribbon cable on the other side.
  • Pull the brown tabs to disconnect the white ribbon cable on the other side.

Kommentar hinzufügen

Caution: do not pull on the wires, instead pull from the plastic connectors. To disconnect the remaining ribbon cables, pull the plastic connectors away from their connections.
  • Caution: do not pull on the wires, instead pull from the plastic connectors.

  • To disconnect the remaining ribbon cables, pull the plastic connectors away from their connections.

Kommentar hinzufügen

With a Phillips #1 screwdriver, Unscrew the nine 10mm screws holding the case together.
  • With a Phillips #1 screwdriver, Unscrew the nine 10mm screws holding the case together.

Kommentar hinzufügen

Using a spudger, press in the five tabs on the side where the battery was.
  • Using a spudger, press in the five tabs on the side where the battery was.

  • This should separate the two halves of the device. Carefully set the side with the display off to the side.

Kommentar hinzufügen

Locate the Bluetooth board. Disconnect the ribbon cable by pulling on the plastic connector. Disconnect the ribbon cable by pulling on the plastic connector.
  • Locate the Bluetooth board.

  • Disconnect the ribbon cable by pulling on the plastic connector.

Kommentar hinzufügen

Unscrew the 4mm screw holding the board onto the tablet. Lift the board out of the tablet and carefully set it aside.
  • Unscrew the 4mm screw holding the board onto the tablet.

  • Lift the board out of the tablet and carefully set it aside.

Kommentar hinzufügen

Locate speaker connectors on tablet and unplug them by pulling on the plastic heads. Locate speaker connectors on tablet and unplug them by pulling on the plastic heads. Locate speaker connectors on tablet and unplug them by pulling on the plastic heads.
  • Locate speaker connectors on tablet and unplug them by pulling on the plastic heads.

Kommentar hinzufügen

To remove the speaker near the network port, unscrew the two black 4mm screws securing it to the tablet and pull away. To remove the speaker near the network port, unscrew the two black 4mm screws securing it to the tablet and pull away.
  • To remove the speaker near the network port, unscrew the two black 4mm screws securing it to the tablet and pull away.

Kommentar hinzufügen

To remove the speaker near the headphone jack, unscrew the one 4mm black screw securing it to the tablet. To remove the speaker near the headphone jack, unscrew the one 4mm black screw securing it to the tablet.
  • To remove the speaker near the headphone jack, unscrew the one 4mm black screw securing it to the tablet.

Kommentar hinzufügen

Unstick the white masking tape and the black electrical tape holding the black and red wire down. Pull out the wire and speaker.
  • Unstick the white masking tape and the black electrical tape holding the black and red wire down.

  • Pull out the wire and speaker.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

David Troy

Mitglied seit 04.04.2012

44 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team 15-14, Forte Spring 2012 Mitglied von Cal Poly, Team 15-14, Forte Spring 2012

CPSU-FORTE-S12S15G14

5 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 866