Einleitung
Blurry photos? Camera not working at all? Use this guide to replace the camera.
Was du brauchst
-
-
-
Remove both 4 mm screws on the top of the tablet with a PH00 screw driver.
Frag FixBot
-
-
-
-
With a spudger, flip up the ZIF connector that connects the camera's ribbon cable to the motherboard. This will release the ribbon cable.
-
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
Team
Eastern Washington University, Team 1-4, Rowley Winter 2016 Mitglied von Eastern Washington University, Team 1-4, Rowley Winter 2016
EWU-ROWLEY-W16S1G4
4 Mitglieder
10 Anleitungen geschrieben
