Zum Hauptinhalt wechseln

Einleitung

This guide shows users how to replace the screen. By first taking the device apart until they can reach the screen so that they can replace it.

  1. VTech MobiGo Touch Learning System Screen Replacement, Case: Schritt 1, Bild 1 von 1
    • Remove the battery covers and the four batteries.

  2. VTech MobiGo Touch Learning System Screen Replacement: Schritt 2, Bild 1 von 2 VTech MobiGo Touch Learning System Screen Replacement: Schritt 2, Bild 2 von 2
    • Remove the four plastic caps with a metal spudger to expose the 6.0 mm Philips JIS #0 case screws.

    • Remove the eight 6.0 mm JIS #0 case screws.

  3. VTech MobiGo Touch Learning System Screen Replacement: Schritt 3, Bild 1 von 2 VTech MobiGo Touch Learning System Screen Replacement: Schritt 3, Bild 2 von 2
    • Using a plastic opening tool, separate the two pieces of the case carefully.

  4. VTech MobiGo Touch Learning System Screen Replacement, Disassembling VTech MobiGo Touch Learning System Screen Enclosure: Schritt 4, Bild 1 von 1
    • Remove the three 4.0 mm Philips J0 screws holding the "L" shaped brackets in place.

  5. VTech MobiGo Touch Learning System Screen Replacement: Schritt 5, Bild 1 von 1
    • Remove the three "L" shaped brackets and the spring.

  6. VTech MobiGo Touch Learning System Screen Replacement: Schritt 6, Bild 1 von 1
    • Flip the device over and remove the three 4.0 mm Philips J0 case screws.

  7. VTech MobiGo Touch Learning System Screen Replacement: Schritt 7, Bild 1 von 1
    • Separate the front and back of the case.

    • Use a plastic opening tool if necessary.

  8. VTech MobiGo Touch Learning System Screen Replacement, Screen: Schritt 8, Bild 1 von 1
    • Remove the 4 (3.4 mm Philips J0) screws holding the screen in

  9. VTech MobiGo Touch Learning System Screen Replacement: Schritt 9, Bild 1 von 1
    • Remove the black tape

  10. VTech MobiGo Touch Learning System Screen Replacement: Schritt 10, Bild 1 von 1
    • Remove the circuit board from the back of the screen.

    • The circuit board has double sided tape on the back side holding it to the screen.

  11. VTech MobiGo Touch Learning System Screen Replacement: Schritt 11, Bild 1 von 1
    • Peel the ribbon wire off of the circuit board. Now the screen should be free to remove.

  12. VTech MobiGo Touch Learning System Screen Replacement: Schritt 12, Bild 1 von 1
    • Resolder the new screens ribbon cable on the the circuit board.

    • Always be careful when soldering.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Daniel Kresge

Mitglied seit: 01.09.2015

385 Reputation

4 Anleitungen geschrieben

Team

USF Tampa, Team 8-3, Eyestone Fall 2015 Mitglied von USF Tampa, Team 8-3, Eyestone Fall 2015

USFT-EYESTONE-F15S8G3

3 Mitglieder

16 Anleitungen geschrieben

Ein Kommentar

mine i droped a rock on so i don’t get it

Jesse Eagan - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 4

Letzten 30 Tage: 10

Insgesamt: 462