Ionic Breeze Disassembly

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen auch die Anleitung, die diese beinhaltet.

Englisch

Deutsch

Schritt 5 übersetzen

Schritt 5

Remove Upper Electronics

Gently lift up on the top in order to separate it from the half that it is attached to.
Be gentle when lifting the top as there are cables soldered into place that run down the length of the device. Don't jerk it out, NO PUN INTENDED, as you may damage these wires or their solder points.
Pull the plastic piece out from its retaining slot.
At this point, the PCB may make a slight popping sound. It didn't break! It simply popped out of it's retaining slot as well as you removed the plastic piece.
Remember, be gentle with the grey plastic piece. It's still attached to the bottom electronics via the 2 static cords. DO NOT over stretch these cords.
Remove the single screw that's hidden underneath the top/power button unit.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.