Einleitung
Verwende diese Anleitung, um in deinem iMac Intel 20" EMC 2133 oder 2210 eine Festplatte zu installieren.
-
-
Falls erforderlich entferne das Klebeband, welches das Temperatursensorkabel von Festplatte oder optischem Laufwerk am iMac befestigen.
-
-
-
Trenne den Festplatten-Temperatursensor, indem du den Stecker in Richtung der Spitze deines iMac ziehst.
I didn't do this on my 2133; just pushed wires out of the way.
-
-
-
Drücke die Festplattenhalterung nach unten in Richtung der unteren Kante des iMac, um sie aus dem rückwertigen Gehäuse zu befreien. Anschließend drehe die Oberseite des Laufwerks zu dir.
At first it looked like it needed extra force, rather stand the computer in its stand press the bracket firmly it will come out.
Great set of instructions altogether!
I just braced the foot/stand against my thigh and found there wasn't much force needed. Had to do it twice as I missed the foam pad on the drive I was replacing.
The whole process was simpler than I expected.
I seem to have missed something somewhere as I now have a lot more fan activity than before. A missed sensor connection maybe. Not looking forward to tracking it down.
I worked with the top of the screen facing me. It was very easy to brace my fingers and press with my thumbs to release the drive. I recommend doing it that way if you can.
I just used pliers….. Easy!
-
-
-
-
Drehe die Festplatte zu dir, dann hebe sie aus ihren Befestigungsstiften.
-
-
-
Stecke das flache Ende eines Spudgers zwischen den SATA-Stromkabelanschluss und den Rand der Festplatte.
-
Drehe den Spudger, um den Stecker von der Festplatte zu trennen.
-
-
-
Löse die Verbindung des SATA-Datenkabels, indem du dessen Anschluss von der Festplatte abziehst.
-
Arbeite die Schritte in umgekehrter Reihenfolge ab, um dein Gerät wieder zusammenzubauen.
Arbeite die Schritte in umgekehrter Reihenfolge ab, um dein Gerät wieder zusammenzubauen.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
4 weitere Nutzer:innen haben diese Anleitung absolviert.
Besonderer Dank geht an diese Übersetzer:innen:
100%
Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›
Ein Kommentar
Walter, I was working on a mid-2007 IMac (2133) and found your instructions helpful but not always complete or right. I have added some comments in some of the steps to clarify.
Pull the temperature sensor cable for the optical drive well out of the way so you don't trap it when inserting the new hard drive.
kevinp - Antwort