iPhone 5 Lautstärkeregler kurz ersetzen

Was du brauchst

Schritt 1 Lautstärkeregler

iPhone 5 Lautstärkeregler kurz ersetzen, Lautstärkeregler: Schritt 1, Bild 1 von 2

iPhone 5 Lautstärkeregler kurz ersetzen, Lautstärkeregler: Schritt 1, Bild 2 von 2

Entferne die folgenden Schrauben, welche die Vibrationsbügel und den -motor am hinteren Gehäuse befestigen:
Eine 2,3 mm Kreuzschlitzschraube
Eine 1,7 mm Kreuzschlitzschraube
Eine 1,6 mm Kreuzschlitzschraube oben im hinteren Gehäuse

Übersetzen

How do I remove the 1.6mm screw?

Alexei - 4. Dez 2019 Antwort

Schritt 2

Entferne den Vibratorbügel und den -motor vom hinteren Gehäuse.

Übersetzen

Make sure you have removed all 3 screws connected to the vibrator since the bracket is welded on the motor house.

Johnny - 7. Aug 2013 Antwort

Schritt 3

Entferne die folgenden Schrauben, welche die Lautstärketaste und die Bügel des Stummschalters an der Seitenwand des hinteren Gehäuses befestigen:
Eine 1,5 mm Kreuzschlitzschraube
Zwei 1,8 mm Kreuzschlitzschrauben

Übersetzen

The middle one 1,8 = 1,2 mm

Daniel Mone - 2. Mai 2014 Antwort

yes, it is like you say

[Ados Production] - 18. Sep 2017

I can't remove the top screw for some reason, should it be any different from the rest?

arnaudjb - 4. Jun 2015 Antwort

When reassembled I noticed that when I firmly tightened these two screws tagged with orange circle , my ringer switch was stuck and didn't move. So I left these two screws little loose and ringer switch worked fine. Now I have used my phone couple weeks and there has been no problem with these loose screws.

Asko Pesola - 18. Mär 2016 Antwort

on my device the red circled screw is completely different. Under my magnifying glass the head is round. Don’t know how to unscrew. There is no fitting bit in my ifixit Pro Tech Toolkit. :(

Michael Kühnen - 4. Jan 2018 Antwort

When re-assembling these parts, make sure that the volume bracket is inserted UNDERNEATH the ringer switch bracket, or the + volume button will not make positive contact with the switch on the cable.

tinkertoy - 10. Mär 2023 Antwort

Schritt 4

Heble mit der Spitze eines Spudgers den Bügel des Stummschalters von der Seitenwand des hinteren Gehäuses.
Entferne den Stummschalter.

Übersetzen

I didn't see mention of it, but I found the ringer switch button would slide down to OFF during reassembly, so I made sure the new ringer switch was also set to OFF before screwing all back together.

Dean M - 8. Aug 2014 Antwort

I found removing the hinge that secures the power button to require more force than I thought necessary. Seemed to be the most difficult part of the repair. When installing the new AC/PB cable, i started with this assembly and worked backwards. Would have been helpful to include a good set of tweezers in the repair kits for those with fat fingers like mine or who don't have a pair at home.

aroclobama - 10. Jan 2016 Antwort