Repariere deine Sachen Community Store

Mid 2010 Modell A1278 / 2,4 oder 2,66 GHz Core 2 Duo Prozessor

795 Fragen Alle anzeigen
Frage geschlossen

Einstellungen

hang up glass on MacBook Pro after lcd replacement

Hello to all guys, thank you in advance for the advice.

I wanted to ask you a question, I have to disassemble the lcd of my macbook pro mid 2010, but I have a question, after I removed the glass and replaced the lcd panel I'll have to remove the glue on the inner frame and reattach the glass (the glass is not damaged then reassemble his original) or I can simply plug it in again without any cleaning of adhesive?

Thank you all

Andrea

(from ITALY)

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

1) get a towel or some soft surface

2) get a heat gun or a hair dryer and heat up all the adhesive for about a minute

3) scrape all it off with a plastic pry tool or finger nail (be careful not to #*&! up the paint on the inside)

4) apply new adhesive.

Done hope it helped bro

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

1 Kommentar:

Thanks Scott I've been very helpful! I figured the process was so but I have to remove the adhesive from both the glass from the frame inside?

thanks again

von

Einen Kommentar hinzufügen
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 11

Insgesamt: 422