Repariere deine Sachen Community Store

Mitte 2009 Modell A 1278 / 2,26 oder 2,53 GHz Core 2 Duo Prozessor EMC 2336

745 Fragen Alle anzeigen

Einstellungen

Mother Board : S.O.S.

I tried an impossible repair for a customer

MacBook Pro Mid 2009

After updating interrupted, does not start. The motherboard is SOS: 3 long beeps, 3 short and 3 long

I tried everything I believe:

Reinstalling Firmware 1.7 for this model, the CD is rejected (I burned CD 3: the same)

Replacing RAM: Nothing

Replaced the battery, disconnected the battery ...

Unable to start external hard disk or DVD with install., The keyboard is not functional.

If someone in another track, I'm interested, but obviously replace the motherboard!

Firmware Pb, pb Burning CDs or DVDs

Big thank you in advance

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung -1
2 Kommentare

What was being updated here: the firmware, OS or hardware?

von

Mac Os update only

von

Einen Kommentar hinzufügen

2 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

From what I understand the logic board may be pooched. I know of no way to DIY correct this... a logic board repair business might be able to replace/re-flash the firmware chip... but the shade tree fix (if the reload failed) would be to replace the logic board.

If this Answer is helpful please remember to return and mark it Accepted.

War diese Antwort hilfreich?

Ja Nein
Bewertung 2

2 Kommentare:

I think unfortunately you're right :(

von

Firmware/EFI chip changed and it works fine, Thanks

von

Einen Kommentar hinzufügen

Einstellungen

I don't remember seeing the OS installer do a firmware upgrade in the update process. So I'm not sure why your system bit the big one here when you were only upgrading the OS. What OS-X are you installing?

Review this Apple TN on the Beep Codes iMac (Mid 2007) and later models: About startup tones By this your Firmware is in the process of being updated. So it is likely looking for the image file on the HD or DVD you where installing the OS from. Put everything back together and as you were doing the upgrade and see if you can get the process to complete.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

2 Kommentare:

Yea sometimes the firmware seems to take unusually long, and, you must let it restart (possibly more than once) on its own until it stops at the login/desktop (however you have it set up).

von

Mikhrych - Can you give us details on what did it. Did you just let the process complete or did you have to physically swap out the EEPROM after loading it with the firmware.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Mikhrych wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 735