Zum Hauptinhalt wechseln

Modelle A1181 / 1,83, 2, 2,1, 2,16, 2,2, or 2,4 GHz Core 2 Duo Prozessor

1203 Fragen Alle anzeigen

More unfortunate problems-top case

Well, thanks to the helpful community here I got the top case attached properly. However, in the process of removing the top case, it seems that it is now damaged. The KB and Trackpad did not work. So I disassemble again, then the power button does not work. I examine the ribbon cable, and it has a crack running through it where it folds, and it was clearly cut.

I realize I have no other option but to buy another top case, but I just thought that I would post here to see if there is any specific thing I should do to protect the new top case.

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung -1
Einen Kommentar hinzufügen

3 Antworten

Gewählte Lösung

The main thing is to go slow and use care when handling ribbon cables. They are notoriously fragile and can be easily broken. Good luck with your new top case. Ralph

War diese Antwort hilfreich?

Bewertung 2

2 Kommentare:

If it is a Unibody then you have the replace the top case I think. Ralph

von

I think the SR stands for the Santa Rosa processor and the cable link you gave is valid. Bravo +

von

Einen Kommentar hinzufügen

Surely you can find just the cable. See if you can spot a part number on it.

War diese Antwort hilfreich?

Bewertung 2

1 Kommentar:

If your MacBook is NOT a unibody then mayer is absolutely correct. Here is the link to the part. + Ralph

MacBook Upper Case Cable

von

Einen Kommentar hinzufügen

Just another hint: When replacing the topcase, blow out the socket on the logicboard using compressed air, because its easily zapped by statics or shorts.

War diese Antwort hilfreich?

Bewertung 1
Einen Kommentar hinzufügen

Antwort hinzufügen

Zenitar wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 1,511