Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

The Kenmore Elite HE3 is a washing machine by Kenmore.

658 Fragen Alle anzeigen

water coming in to the machine when it is not being used

When I am not using the washing machine, it slowly fills with water.

So everytime I need to wash clothes ,I have to drain the machine. It also makes the machine smell bad. How can I solve this problem?

Beantwortet! View the answer Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

2 Antworten

Gewählte Lösung

Replace your water fill valve or take it apart , remove debris and clean with a product such as CLR. The chances are that the solenoids are good on the fill valve. Most likely it is clogged slightly open with calcium. lime or debris allowing water to trickle through. If you are on a well it is most likely sand or dirt holding the cold water valve open. Clean it out or replace the valve. Then replace the washers to the fill valve(s) with screened washers (where the water hoses attach)to prevent this from happening again. Instructions for removing/replacing valve can be found inthis video. Good Luck!

War diese Antwort hilfreich?

Bewertung 1
Einen Kommentar hinzufügen
Hilfreichste Antwort

Water Inlet Valve

If the washer fills very slowly, the water pressure from the house might be too low. If the pressure is good, try cleaning the screens inside the water inlet valve hose connection ports. If those are clean replace the water inlet valve.

Other Causes and Conditions

Low Water Pressure from House Supply

If the washer fills very slowly, the water pressure from the house might be too low. If the water inlet valve isn't leaking and there are no other symptoms this problem does not need to be corrected.

War diese Antwort hilfreich?

Bewertung 1
Einen Kommentar hinzufügen

Antwort hinzufügen

deb wird auf ewig dankbar sein.
Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 0

Insgesamt: 161