Rep: 83
5
2
Hi,
My mid-2010 MacBook is starting to overheat, and according to the temperature sensors, the CPU is hitting 100+ degrees Fahrenheit. I ran the AHT, and it can't get past the RAM test without locking up. Is my heatsink damaged, or is the motherboard FUBAR?
Thanks!
Ist dies eine gute Frage?
Rep: 685,3 Tsd.
3,4 Tsd.
1,1 Tsd.
2,6 Tsd.
Well if it can't get past the RAM test, that where I would start.
Update
Will it boot all the way up? It so go under the Apple to about this Mac> Memory and see if it is seeing what's installed. If it is not seeing all of it, reseat the RAM.
Next open it up and blow it out. If it is heavy on the dust, remove the fans and clean the vents. Here's how:
MacBook Unibody Model A1342 Lüfter Austausch
Now boot the Mac with the back off and insure that the fan is running.
If it is still running hot we need to look at the heat sink and thermal paste replacement. This model uses a liquid filled heat sink that can develop a leak. So when you go to replace the paste look on the logic board for traces of an oily looking stain. If you find it, replace the heat sink.
MacBook Unibody Model A142 Kühlkörper tauschen
Wie trage ich Wärmeleitpaste am besten auf
[verlinktes Produkt fehlt oder ist deaktiviert: IF179-010]
Anleitung
Schwierigkeitsgrad:
Mittel
—
5 - 20 minutes
Anleitung
Schwierigkeitsgrad:
Mittel
—
10 - 30 minutes
Anleitung
Schwierigkeitsgrad:
Schwierig
—
15 - 30 minutes
War diese Antwort hilfreich?
Well, how should I check it? Is there a program I can get to do it?
It sees all of the RAM. I've confirmed the fan is fully working, so I'll check the heatsink when I get a chance. Thanks!
Letzte 24 Stunden: 0
Letzte 7 Tage: 1
Letzte 30 Tage: 1
Insgesamt: 721
