Zum Hauptinhalt wechseln

A rechargeable, cordless beard trimmer created by Philips. The model number is QT4000/42.

7 Fragen Alle anzeigen

Why is the blade making unusual noise and stopping after a few seconds

Firstly where shud the spring ends be placed while reassembling the parts

And the trimmer is making unusual noise and stopping after a few seconds

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

2 Antworten

Gewählte Lösung

Siddhant dhandhania , Make sure the head is clean and undamaged,try lubricating blade very lightly, ensure assembled correctly. If all looks good and still stopping after a very short time batteries could be worn out or motor may be on it's way out. If still under warranty use it for replacement/repair/refund. Use the link below to aid in blade installation. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

Philips Norelco BeardTrimmer 3100 Blade Replacement

War diese Antwort hilfreich?

Bewertung 4
Einen Kommentar hinzufügen

i get this on mine, its usually Jammed. i lucked out and baught a water proof model. so i just run it under the tap, and its good to go. i know this probably doesnt help, but its better to try before replacing it.

War diese Antwort hilfreich?

Bewertung 1

2 Kommentare:

I have just replaced the new set of blades. After some initial 5-6 shaves, this problem has started. Even after cleaning the three rotors under fast tap, the problem refuses to go. Can you suggest some other solution please?

von

try cleaning it and then add some oil inbetween the blades if you havent done that yet

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Siddhant dhandhania wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 13

Letzte 30 Tage: 41

Insgesamt: 6,268