Zum Hauptinhalt wechseln

Device and repair information for the Behringer Eurolive B212D speaker system.

31 Fragen Alle anzeigen

Loud hiss when turned on

Suddenly when I plug in and turn on my speaker there is a loud hiss.

I've tried different power cables and plugging into different outlets.. The hiss is evident whether or not there is a sound source plugged in.

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

2 Antworten

Gewählte Lösung

@townband , Steve , Unplug speaker and use the guide below to disassemble the speaker and spray switches with electro-contact cleaner and remove, spray and reseat connections to see if that gets rid of hissing. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.

Disassembling Behringer Eurolive B212D Power & Control Panel

War diese Antwort hilfreich?

Bewertung 2

2 Kommentare:

I will check it out. Again, the last people to use it were outside and unsupervised.

Who know what they did to it!

von

Steve, Good plan, look for water damage also then, if it does appear to have some on the board use this general guide link below, to to help clean of possible corrosion. Thanks for replying back, good luck with your speaker.

Electronics Water Damage

von

Einen Kommentar hinzufügen
Hilfreichste Antwort

A hiss or buzz in a speaker system usually indicates a poor ground at the speaker . A solder joint may have let loose so that the wires still attached but not a good ground . You'll need to take it apart and check the grounds. Hope this helps

War diese Antwort hilfreich?

Bewertung 2

1 Kommentar:

Great thought. I will try it out. The last people to use it were outside unsupervised! Thanks.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Steve wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 5

Letzte 30 Tage: 43

Insgesamt: 2,393