Zum Hauptinhalt wechseln

Das erste Modell des iPhone, Modell A1203 mit 4, 8 oder 16 GB Kapazität und einer Aluminiumrückseite. Die Reparatur erfordert erhebliches Hebeln und möglicherweise auch Löten. Diese Seite soll Nutzer:innen bei der Fehlersuche und -behebung helfen und sie bei der Suche nach Hilfe für das iPhone 2G unterstützen.

224 Fragen Alle anzeigen

How to replace the glass only?

Has anyone tried this? Found a 25 dollar 1st gen in good condition on eBay and I would like to get it but it has a cracked glass. LCD is fine. Does it have LOCA? It is like the 3G/3GS screen?

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Hilfreichste Antwort

Due to the design of the iPhone, the glass cannot be replaced seperately from the LCD panel. The glass and LCD are fused together during manufacturing and cannot be separated. Both the glass and LCD panel must be replaced as a unit.

iPhone 1. Generation Displayeinheit austauschen

War diese Antwort hilfreich?

Bewertung 3

3 Kommentare:

Could I remove the dock connector?

von

@mayer is correct. The average user can't replace the glass on it's own. This is not a DIY job.

It can be done with the right equipment, new glass, a UV light and LOCA glue but it's probably something you aren't capable of doing.

von

I have done LOCA replacements before, they were not perfect but they looked a lot better (a spec of dust got in the screen) Also, I just bought the phone.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Gigabit87898 wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 6

Insgesamt: 66