Repariere deine Sachen Community Store

Version 2 of Parrot's toy quadcopter with HD camera, controlled over Wifi by smartphone.

24 Fragen Alle anzeigen

Einstellungen

AR drone 2.0 board to board connector - need to solder it back

Hey,

So today I flew my ar.drone 2.0 around and had a crash.

After the crash I got "PIC watchdog emergency" notification on the screen.

Disassembled the thing and noticed that the board-to-board connector partly chipped off the PCB taking some of the solder pads with it.

Has anyone had similar issue or experience with fixing the ar drone 2.0 PCB?

Are there any PCB schematics on the Internet? I didn't have luck with finding any.

Thanks in advance!

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Hilfreichste Antwort

Einstellungen

@tomek_l there are no schematics of it yet. It is extremely difficult to find anything repair related on any drone. In your case I'd suggest you contact a good microsoldering business (this will depend on where you live etc.) and have them take a look at it. Sometimes traces can be rebuild and the experts can almost always come up with a fix. It might also help if you post some images of your damage with your question. For that use this guide Bilder zu einer vorhandenen Frage hinzufügen

War diese Antwort hilfreich?

Ja Nein
Bewertung 1
Einen Kommentar hinzufügen

Antwort hinzufügen

Tomasz Lewicki wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 5

Insgesamt: 169