Can I glue back the original digitizer of my Galaxy S3?

Question

Samsung Galaxy S III

Das Samsung Galaxy S3 ist ein Smartphone mit Multitouch- und Drahtlosladefunktion, ist Eyetracking-fähig und hat einen vergrößerten Speicher.

459 Fragen Alle anzeigen

Oscar @acsor

Rep: 11

1

Veröffentlicht: 7. Jan 2018

Einstellungen

Can I glue back the original digitizer of my Galaxy S3?

I'm venturing into the crazy idea of replacing my Galaxy S3 frame with a newer one, something which wasn't really necessary.

Yesterday I unglued the digitizer, and I saw the way it is glued to the "core screen" and the frame. Since the digitizer is still perfectly OK, can I glue it again on the newer frame? Do I need to buy a special glue for this operation, or am I better off purchasing a completely new digitizer? That is, how can I reuse this old digitizer, if possible?

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein

Bewertung 0

Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

Ben @benjamen50

Rep: 159,8 Tsd.

Mtwo Perform

11

191

368

Veröffentlicht: 7. Jan 2018

Einstellungen

It's doable with Loca Liquid glue which you put between the glass and the LCD. There are videos on how to do this on YouTube.

https://www.youtube.com/watch?v=7hzCCsex...

War diese Antwort hilfreich?

Ja Nein

Bewertung 4

6 Kommentare:

Thank you for the answer. With that I can continue to use my old digitizer, as long as I remove the old glue from both the screen layers, right?

7. Jan 2018 von Oscar

Old digitizer? Digitizer means touch screen and the touch screen is fused with the LCD.

The glass is just a piece of glass.

Yes you can actually use the screen without a piece of glass. If you are going to put a new glass on, make sure to remove the glue.

7. Jan 2018 von Ben

I did a research before this post on that term and it seemed that "digitizer" referred to the piece at the far right in my photo. Isn't it so?

8. Jan 2018 von Oscar

Well it isn't because digitizer refers to touch screen layer which would traditionally be fused with the glass.

But with these Samsung screens the touch screen layer is fused with the Samsung LCD display instead.

The glass you see on the right has no ribbon cable coming out of it indicating it is not a digitizer.

8. Jan 2018 von Ben

Thank you for the answer. Can it be called "front glass", or does it have a name at all, in the widespread jargon?

9. Jan 2018 von Oscar

1 weiteren Kommentar anzeigen

Einen Kommentar hinzufügen

Thank you for the answer. With that I can continue to use my old digitizer, as long as I remove the old glue from both the screen layers, right? — Oscar
Old digitizer? Digitizer means touch screen and the touch screen is fused with the LCD.

The glass is just a piece of glass.

Yes you can actually use the screen without a piece of glass. If you are going to put a new glass on, make sure to remove the glue. — Ben
I did a research before this post on that term and it seemed that "digitizer" referred to the piece at the far right in my photo. Isn't it so? — Oscar
Well it isn't because digitizer refers to touch screen layer which would traditionally be fused with the glass.

But with these Samsung screens the touch screen layer is fused with the Samsung LCD display instead.

The glass you see on the right has no ribbon cable coming out of it indicating it is not a digitizer. — Ben
Thank you for the answer. Can it be called "front glass", or does it have a name at all, in the widespread jargon? — Oscar

Samsung Galaxy S III

Can I glue back the original digitizer of my Galaxy S3?

1 Antwort

Antwort hinzufügen