Repariere deine Sachen Community Store

Modell A1311 / Mitte 2011 / 2.5 & 2.7 GHz Core i5 oder 2.8 GHz Core i7 Prozessor

432 Fragen Alle anzeigen

Einstellungen

Do I need to replace the thermal paste?

I'm opening my iMac to install an SSD. Since i'm opening it already, I thought, what else can get better here ?

So, should I replace the thermal paste/pads ? The CPU is currently at 57ºC, idle, and the fans are running at 1400 RPM (room temperature is about 28ºC) . Of course the back of the iMac is hot, as expected, but the screen is hot too. I don't know if that's expected to happen.

In the case of a replacement, what should I use ? I've heard of K4 and K5. Why those and are they really necessary? Are pads better? What about Arcticlean remover ?

Thank you in advance.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 2
Einen Kommentar hinzufügen

2 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste
Hilfreichste Antwort

Einstellungen

It is necessary to put any thermal pads back and reapply thermal paste to places where the thermal paste was disturbed. Thermal paste needs a good seal without air bubbles. you also do need to clean off the old thermal paste before reapplying Wie trage ich Wärmeleitpaste am besten auf first thing said in the guide:

{caution sign} Thermal paste is responsible for conducting heat from the processor to the heat sink. Reassembling a computer without applying thermal paste will cause the processor to overheat, resulting in permanent damage.

War diese Antwort hilfreich?

Ja Nein
Bewertung 1
Einen Kommentar hinzufügen

Einstellungen

Hi Enrique,

Have you replaced the thermal paste? did it help? I have a mid2010 27" that is also hot on the back and on the screen.

I've already opened and cleaned it out but am thinking on getting an SSD and wondering if it's a good idea to replace the thermal paste and whether it would help or not.

Thank you!

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

3 Kommentare:

Actually I decided not to give myself all that trouble.

I haven't replaced it, also haven't measured temperature in a while but its about the same as when I first posted.

Instead of replacing my HDD with an SSD, I bought an ssd adapter for the optical drive (not sure what they really call it). I then removed the Optical Drive and placed the SSD there. This way you have waaaay less things to worry about, and is also a much faster procedure.

On my 2011 iMac, I get SATA II speeds, can't get III via the optical drive sata cable. But it is still so fast I can't notice the difference. My computer feels like a new one (actually even faster than a 2015 dell laptop I've got, with an i5 processor that is 4 years newer).

Not sure if you will get SATA I or II speeds on a 2010 machine tough.

To sumarize, I haven't touched my processor, I don't think this temperature is a problem and it's definitely not affecting speed.

Hope this helped!

von

It surely helped!

I think I'm gonna do the same and stop worrying about the temperature thing. I've been monitoring my machine and it seems to be "normal".

I also have SATA II available and that optical drive adapter seems to be a good ideia. I'll take a look on it.

Thanks again!

von

Yeah, I think that's the best way to go.

Sure, you're welcome!

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Henrique Mazer wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 11

Insgesamt: 4,365