Repariere deine Sachen Community Store

2,3GHz, 2,6GHz oder 2,7GHz Quadcore Intel Core i7 Prozessor (Turbo Boost bis zu 3,7GHz) mit 6MB geteiltem L3 Cache.

561 Fragen Alle anzeigen

Einstellungen

No screen power after removal LCD cable without powering laptop off

Hey there guys,

I recently noticed my hinge was loose, so I opened up my macbook pro, and disconnected the LCD cable, but I was stupid enough to not unplug the battery cable, so the device turned on and the fans ramped up to full speed.

After reassembly, the device wouldn't turn on at all, no chime....

After resetting the SMC and PRAM I hear a chime, and the keyboard LEDS light up, but the screen stays black.

I can also press keys to hear my PING sound for errors, the laptop is fully functional I guess?

Shining with a torch trough the apple logo resulted in even more blackness. (I Didn't see anthing)

When I connected the laptop with an MiniDP cable to my 27" 2009 iMac, it recognized it, but a black screen. That could also be courtesy of the cable.

I've tried reconnecting the LCD cable at both ends, but no luck.

Could someone help me, it would be very appreciated.

Thank you,

Tristan

EDIT:

Fuse image:

Block Image

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Hilfreichste Antwort

Einstellungen

You probably blew the backlight filter and fuse.. Common issue when you forget to disconnect power. It will need board repair.

War diese Antwort hilfreich?

Ja Nein
Bewertung 2

9 Kommentare:

So there's practically nothing I can do about it? That's a bummer. A board repair will probably cost 200-300 Euro's, which I don't have at the moment...

Is there any way I can check this? Physical damage to a part?

von

If you have a microscope, you can pull the board and look for any burnt components near the LVDS cable and near the backlight driver but not much you can do without microsoldering equipment.

von

I just tried looking at the board with a 8x zoom on my phone, and everything looks fine around the connector, so I hope it could be something else.

von

It's probably going to be the fuse on the other side of the board

von

I will remove the board tomorrow and I'll look, thanks for the help so far. Even if it is negative. There aren't many ASP's here in the Netherlands, and the closest is a 2,5 hour drive.

von

4 weitere Kommentare anzeigen

Einen Kommentar hinzufügen

Antwort hinzufügen

Tristan van Triest wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 1

Insgesamt: 234