Repariere deine Sachen Community Store

Das iPhone 6 mit dem 4,7 Zoll Display ist die kleinere Version des iPhone 6 Plus und kam am 19. September 2014 auf dem Markt. Es hat die Modelnnummern A1549, A1586 und A1589.

4994 Fragen Alle anzeigen

Einstellungen

Reachability works but Touch ID fails?

Hi,

I did a screen replacement on my iPhone 6. I bought it used for cheap and it looks like a third party had repaired it before. I changed the screen, and at first it told me that Touch ID cannot be set up.

I found out the home extension flex was torn so I replaced that.

Right now my home button works, and the reachability feature which used the sensor works. I am 100% positive this is my original home button, because the Touch ID “Add a Fingerprint” button is not disabled.

I’ve cleaned the connectors and brushed off any dust. There doesn’t seem to be damage to the actual flex cable.

What can I do from here? Thanks for any help.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste

Einstellungen

Touch ID is correlated with your iPhone motherboard. It means that change of screen needs to be done with home button reassembly with oryginał Home button from your previous screen

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

3 Kommentare:

He transferred the home button over. It allows him to use the reachibility mode, but not touch ID. It is not a problem about a non-original button

von

Ouch my mistake.

Sometimes a full system recovery with DFU mode helps with sensor issues.

von

Yes, it’s the original home button. A non-original home button would give me a prompt saying Touch ID cannot be activated. I will try a full restore.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Eric Zhang wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 6

Insgesamt: 409