Lightning replacement - one speaker is mute

Question

iPad Mini Wi-Fi

7,9 Zoll Display / Modell A1432 / Verfügbar in schwarz und weiß / Angekündigt am 23. Oktober 2012 / 16, 32 oder 64 GB Speicherkapazität

220 Fragen Alle anzeigen

Anri @intenditore

Rep: 71

4

3

Veröffentlicht: 27. Aug 2018

Einstellungen

Lightning replacement - one speaker is mute

Guys, I just swapped lightning flex cable im my iPad mini 1. It was tricky, but I somehow succeed, except one speaker is totally not working. I tried to fix it but no luck, I don't find what's wrong and what MAY BE wrong at all.

So, please, can you provide me with PINOUT SCHEME of lightning flex cable? I have found this datacheet

https://datasheetgadget.wordpress.com/20...

But where exactly is the Lightning here? I suspect it's ALISON-A0-OTPXX (page 81) but it's hard to understand where are the speakers pinouts. Can you help reading the scheme and determining it please?

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein

Bewertung 0

Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

Minho @refectio

Rep: 221,4 Tsd.

15

289

807

Veröffentlicht: 27. Aug 2018

Einstellungen

ALISON is the Power Management IC (PMIC) and doesn’t have anything to do with the speaker outputs (other than power the speaker amplifier IC).

What you need to look for is J5700. That is the connector for the Lightning port and speakers.

War diese Antwort hilfreich?

Ja Nein

Bewertung 2

6 Kommentare:

Wow... How much ignorant I am in schematics despite I do many repairs for myself! :\ (shame on me)

Many thanks, that's exactly what I needed :)

27. Aug 2018 von Anri

Live and learn...every day! :>).

27. Aug 2018 von Minho

Sorry, one more question! In regards of orientation - do I get right that the first pin is on the side closer to the edge of device and the 32nd is closer to the battery? It's logical to decide so because it's shown in the same orientation as on the MB main drawing but I want to be sure

27. Aug 2018 von Anri

I believe 1 is closest to the battery and 32 is closest to the case edge. Normally, the pinout follows the orientation of the way the connector is placed on the schematic.

27. Aug 2018 von Justin Robison

In this case, PIN 1 is the top-left pad, viewed from the same orientation as my image. The left hand column is odd number and the right hand column is even numbered.

Like this:

1

---2

3

---4

5

---6

etc.

Logic doesn't always apply to connector or IC orientation because sometimes a different orientation will make the traces easier to route. When in doubt, look and probe for GND pins and determine orientation that way. Or if you have access to a tool like ZXW, it will show you where Pin 1 is.

27. Aug 2018 von Minho

1 weiteren Kommentar anzeigen

Einen Kommentar hinzufügen

Wow... How much ignorant I am in schematics despite I do many repairs for myself! :\ (shame on me)

Many thanks, that's exactly what I needed :) — Anri
Sorry, one more question! In regards of orientation - do I get right that the first pin is on the side closer to the edge of device and the 32nd is closer to the battery? It's logical to decide so because it's shown in the same orientation as on the MB main drawing but I want to be sure — Anri
I believe 1 is closest to the battery and 32 is closest to the case edge. Normally, the pinout follows the orientation of the way the connector is placed on the schematic. — Justin Robison
In this case, PIN 1 is the top-left pad, viewed from the same orientation as my image. The left hand column is odd number and the right hand column is even numbered.

Like this:

1

---2

3

---4

5

---6

etc.

Logic doesn't always apply to connector or IC orientation because sometimes a different orientation will make the traces easier to route. When in doubt, look and probe for GND pins and determine orientation that way. Or if you have access to a tool like ZXW, it will show you where Pin 1 is. — Minho

iPad Mini Wi-Fi

Lightning replacement - one speaker is mute

1 Antwort

Antwort hinzufügen