Zum Hauptinhalt wechseln

Veröffentlicht am 24. Oktober 2011 / 2,2, 2,4, oder 2,5 GHz Quad-Core Intel Core i7 Prozessor

406 Fragen Alle anzeigen

MacBook Pro Stops Charging on High Load

Hi,

Since a few days, when my MacBook Pro is connected to the MagSafe power source and I Log On … Open an app that demands more resources like virtual machine, iPhone simulator in Xcode, etc., The computer stops charging (MagSafe LED goes off) and I have to disconnect from power, wait at least 15-20 seconds and connect it again in order to start charging again.

The battery has 724 cycles and Coconut Battery says is in good condition.

Block Image

Hope someone can help.

Regards.

Update (10/25/2018)

Hi Dan,

This images are before and after stops charging on high load.

Block Image

Block Image

Regards.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 1
2 Kommentare

Lets look at this from a different direction. What do you have for RAM & storage?

More RAM (max 16 GB) and going with a SSD will improve power usage over low RAM and using a HDD.

von

I have 16 GB of RAM and SSD for a few years, never had that problem.

von

Einen Kommentar hinzufügen

1 Antwort

Hilfreichste Antwort

Lets check the MagSafe charger and its connection to your system. Refer to this Apple T/N Apple Portables: Troubleshooting MagSafe adapters focus on the cable and connector condition. Often times the connector faces are dirty, use a cotton swab (Q-Tip) with some isopropyl alcohol to clean them.

The next time your MagSafe LED goes out quickly open CoconutBattery and take a fresh snapshot.

Update (10/25/2018)

At this point I’m thinking the DC-In Board plastic insulator is warping as the current load is warming it up. Here’s the IFIXIT guide: MacBook Pro (15 Zoll, Ende 2011, Unibody) MagSafe DC-in Board (Gleichspannungsversorgungs-Platine) and here’s the needed part: MacBook Pro Unibody 13" and 15" MagSafe DC-In Board

MacBook Pro Unibody 13" and 15" MagSafe DC-In Board Bild

Produkt

MacBook Pro Unibody 13" and 15" MagSafe DC-In Board

$9.99

War diese Antwort hilfreich?

Bewertung 1

1 Kommentar:

Hi Dan,

I cleaned the connector with isopropyl alcohol, checked the cable and is in good condition, but the problem persists.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Nials De La Cruz wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 4

Letzte 30 Tage: 7

Insgesamt: 130