Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Veröffentlicht im Juni 2009 / 2,53 GHz Core 2 Duo Prozessor

192 Fragen Alle anzeigen

Top side corner of MBP screen lifting up, needs glue maybe? (Photo)

Block Image

Hello all. My old 2009 MBP has the back corner screen top lifting up when I close the machine. The screen works fine, and I can push the screen back down in the corner. I assume the glue needs to be re-applied?

I took the machine to a local repair shop, and they wanted to replace the entire top half of the machine, including the LCD screen, which I really can’t afford, and I’m not sure it needs to be replaced. Otherwise the machine is still going strong after almost 10 years.

If anyone has dealt with a similar issue, please let me know.

Beantwortet! View the answer Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

Nintendo Switch Kits

Eine schnelle Lösung, um wieder ins Spiel zu kommen

Switch Kits kaufen

Nintendo Switch Kits

Eine schnelle Lösung, um wieder ins Spiel zu kommen

Switch Kits kaufen

2 Antworten

Gewählte Lösung

Take a look at this video and see if it helps, you may just need to tighten hinges and that may be enough but it looks like the metal blocks for hinge reinforcement have separated from the top chassis and may need to be reglued with epoxy.

https://www.youtube.com/watch?v=Gi6vlshg...

War diese Antwort hilfreich?

Bewertung 5

Kommentare:

That is super helpful, thank you Ben. I'll update when I can get home and try this.

von

I'm with @benjamen50 here! Epoxy is the ticket! But you'll need to get the display apart to clean the old glue and you'll want to scuff up the surface to make a better surface for the epoxy to adhere to.

Here's the IFIXIT guide to take your display fully off: MacBook Pro (15 Zoll, Mitte 2009, Unibody, 2,53 GHz) Displayeinheit austauschen and here's the IFIXIT guide to take the display assembly apart MacBook Pro (15 Zoll, Ende 2008 und Anfang 2009, Unibody) LCD austauschen Jump down to Step14 and pick it up there.

Once the display is out you can clean and sand the pulled areas. You'll want to place a display frame & cover on a good flat surface with a wood board going on top with a bit of weight for a good 24hrs for the epoxy to cure. I would also place added epoxy around the frame at the glue points to add more strength. Just make sure you don't go into the areas the display fits into. And don't forget to sand the surfaces to give the epoxy a better grip!

von

Thank you so much for the extra info and links Dan. I think you're correct also. After looking inside, I don't think it's the hinge, but the display coming apart.

von

I have this issue too can anyone recommend me a good brand for epoxy ?

von

Einen Kommentar hinzufügen

Chances are its from apples terrible design of having ALL the hot air from the cpu and gpu blowing on the hinge glue. Not your fault. Put some new epoxy and it should be fine

War diese Antwort hilfreich?

Bewertung 1

Kommentare:

Thank you Ethan, I think you're right that the hot hair has had an impact over the years.

von

For sure. Good luck

von

Einen Kommentar hinzufügen

Antwort hinzufügen

nicholas.he wird auf ewig dankbar sein.
Statistik anzeigen:

Letzten 24 Stunden: 1

Letzten 7 Tage: 4

Letzten 30 Tage: 16

Insgesamt: 187