Zum Hauptinhalt wechseln

Support and repair information for Marantz home theater AV receivers and older audio-only receivers.

47 Fragen Alle anzeigen

Marantz SR-60 Receiver amplifier

Hi There,

I got a Marantz SR-60 tuner and amplifier that started to blow the 1.25 amp fuse on the power switch and supply board.

Is there a way of getting a board like this, the spec number on the board is:P904 yk058j1 52-2.

When you turn on the unit, it goes on pre-on then, if you turn the unit on and off a few times it just blows the fuse. Not sure it would be the mauve, the board or the fuse.

Would anyone have an idea of what's causing the problem.

Eddie

Thanks

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung -1
Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

It sounds like bad caps or a bad powersupply. Here is the service manul. Take a look and check it out. If you can not get a whole new logic board, all the components are listed, so you should have no trouble fixing it. Good Luck

War diese Antwort hilfreich?

Bewertung 4

2 Kommentare:

I have SR60 , with one channel intermittent disorted sound, what the cause ? can I have the service manual. thanks

von

you can contact me by email, my address is in my user profile. I may still have it....;-)

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Eddie wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 2,463