Repariere deine Sachen Community Store

A series of 40 inch LCD HDTVs by Sony.

193 Fragen Alle anzeigen

Einstellungen

No picture, no sound, no blinking lights on Sony KDL-40W600B

Cannot turn on with remote or button on TV. Unplugged power brick, waited overnight. Applied power again. Got a brief Sony logo on screen, then it went dark. I have repeated the power disconnect/reconnect several times. Results always the same. No picture (other than the Sony splash screen), no sound and no blinking lights of any kind. I notice that after the splash screen the display has a very dark purple-ish tint until I remove power. Is this a bad board? Any help with which one, if that is the problem? Thanks in advance!

Block Image

Block Image

Block Image

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 1
Einen Kommentar hinzufügen

3 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste
Hilfreichste Antwort

Einstellungen

@jazzbo "this “after the splash screen the display has a very dark purple-ish tint “ is most likely your backlight being on. This could very well be a mainboard issue. Post some pictures of your boards with your question so we can see what you see. Bilder zu einer vorhandenen Frage hinzufügen

Make sure you have a multimeter so we can check a few things

War diese Antwort hilfreich?

Ja Nein
Bewertung 3

1 Kommentar:

oldturkey03, thanks for the fast response. I’ve added pictures of the 3 boards.

von

Einen Kommentar hinzufügen

Einstellungen

Hi @jazzbo ,

Since you get the splash screen and the unit stays powered on, I'm wondering if it is a software problem rather than a hardware problem. Which would also be on the mainboard where the problem may be as suggested by @oldturkey03

Here's a link showing how to update the firmware in your model TV.

I don't know if it will work if your TV's firmware is a later version or not.

You can contemplate attempting this as a last resort if all else fails to resolve the problem

War diese Antwort hilfreich?

Ja Nein
Bewertung 2

1 Kommentar:

Thanks @jayeff. If all else fails I'll give this a go.

von

Einen Kommentar hinzufügen

Einstellungen

It sounds like you have a faulty LD BOARD. Replace it you are good to go. just for emphasis it is the second picture you uploaded.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

R Foster wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 3

Letzte 7 Tage: 4

Letzte 30 Tage: 13

Insgesamt: 669