Repariere deine Sachen Community Store

Herausgegeben am 25. September 2015. Model A1687/A1634. Die Reparatur des 6s gestaltet sich ähnlich zu denen früherer Generationen; benötigt werden Schraubenzieher und Hebelwerkzeuge. Verfügbar mit GSM oder CDMA / 16, 64 oder 128 GB / Silber, Gold, Space Grau oder Roségold.

2690 Fragen Alle anzeigen

Einstellungen

Ambient Light Sensor Filter Replacement

Along the top of a black iPhone 6/6S/7/8 (and their plus equivalents) there is a small white sticker under the ambient light sensor that filters light. This only exists on the black screens. I always transfer it over when doing a repair, but the odd time the area where the original is damaged has either caused it to go missing or has torn it causing it useless.

Am I able to get a replacement for this small white piece of (seemingly) paper? Without it, an active phone call placed to the ear does not black out the screen - resulting in buttons being pushed on the screen during a call.

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

I think you are getting confused with the ambient light sensor and the proximity sensor.

The proximity sensor is there to detect when the phone is up against your face, putting the screen to sleep.

The ambient light sensor is used to adjust the brightness of the screen in different lighting scenarios. This is the one that has the filter paper. I have never really noticed if this makes a difference if it is there or not on the black screens.

If you think the ambient light sensor is not working correctly due to the filter missing you could just cut a piece of filter paper to pop in there. I have heard of people using a white marker but I am not sure of the results.

War diese Antwort hilfreich?

Ja Nein
Bewertung 2

1 Kommentar:

Ok so if I have an iPhone 8 that the screen isn't locking while on a phone call (after the screen was replaced) would it be more likely that the proximity sensor isn't seated properly? I know the camera flex cable on the 8 is finickier to reset than the ones before it.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Bill Shannon wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 595