Rep: 33
2
2
Diagnostic LED No 4 is OFF while computer is ON.
No display, Nothing
Checked with flash light, showing nothing
3.5v showing on pin 3 of the connector
so I checked the LCD panel with another iMac found that the display is working fine.
what should I check / do next?
Thanks in advance
Ist dies eine gute Frage?
Rep: 479,6 Tsd.
35
329
971
The inverter board would affect the backlight. But you stated the flashlight test failed so thats not your issue here.
Which model do you have the EMC 2133 or EMC 2210?
The EMC 2133 offers a MXM GPU board unlike the EMC 2210 which does not. You either need a new GPU board or a new logic board. As your GPU has failed. Thats assuming the system was not damaged in opening it. A common issue in this series is damaging the LVDS cable or the logic board connector.
War diese Antwort hilfreich?
I pull the LCD unit out and put in another working iMac and found the display is working perfectly, so the cables attached to the panel are also find. LED 4 is OFF when computer is ON, and 3.5v is showing on pin 3 of the connector,
"Thats assuming the system was not damaged in opening it. A common issue in this series is damaging the LVDS cable or the logic board connector."
Letzte 24 Stunden: 1
Letzte 7 Tage: 1
Letzte 30 Tage: 1
Insgesamt: 40
1 Kommentar
How can I check if the inverter board is OK or not? There are 4x connectors I can see.
von Qam