Zum Hauptinhalt wechseln

Veröffentlicht am 22. September 2017. Modell A1864, A1897. Erhältlich als GSM oder CDMA / 64 oder 256 GB / Gold, Silber und Space Grau.

684 Fragen Alle anzeigen

Touch Screen not working after replacement

Hi, so I replaced my screen and now the touch is not working really. If I disconnect the home button cable that is attached to the screen, the touch works, but I can’t get past the setup screen since I have to use the home button.

I am not sure why the touch works when only one of the screen cables is connected. Any help would be great!

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

2 Antworten

Gewählte Lösung

This is a common problem with the iPhone 8 series caused by the ground pins at the end of the home button connector being pushed in. If you have some sort of magnification you should be able to pry them out into their normal position.

Block Image

Different screen manufacturers use a different Architecture. If those ground pins are pushed in it might only affect certain screens.

War diese Antwort hilfreich?

Bewertung 3

4 Kommentare:

Thank you! Is this the one on the motherboard or the cable in the screen?

von

It's on the motherboard

von

thank you alot..you are the man.. this solve my problem, I thought lots of things and was thinking the phone no longer working..

von

Thank you, but sometimes you may need to replace the entire connector.

von

Einen Kommentar hinzufügen

The top cable is for the earpiece speaker and proximity sensor. Middle connection is for the screen including touch. The bottom connector is for the home button. I would disconnect the battery and check the connections with a magnifying glass and see if you have any damaged pins. If they are fine I would clean the connectors with a qtip and alcohol and a soft brush, reconnect and check it.

Update (05/21/2020)

You could have damaged them while installing them. It's possible and the best way to find what is wrong is to make sure that everything else works until you get to the last possibility. And I have put on multiple screens on iPhone 8 plus and it has nothing to do with Apple. It's something that happened during the screen change or a defective part.

War diese Antwort hilfreich?

Bewertung 0

2 Kommentare:

I can't see why there would be an issue with the pins since the old screen works just fine. I read something about Apple not enabling people to change screens on Iphone 8 + , but I am not sure if that is still true.

von

Do you think it's possible I need to try a different new screen and see if that one works?

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Zyzz Az wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 10

Letzte 30 Tage: 55

Insgesamt: 2,344