Repariere deine Sachen Community Store

Modell von 2011, A1278 / 2,3 GHz i5 oder 2,7 GHz i7 Prozessor

782 Fragen Alle anzeigen

Einstellungen

What is happening? Missing video and anything else

Hello everyone, this is my first time using this as a platform so have mercy.

I have a 2011 13” Macbook Pro with Board Number 820 2936- B (On the DC IN Board its “820 2565 - A and “Apple 2009” so i guess that is wrong). I checked PP3V42_G3H and that is present, PPVCORE is 0.9 Volts. What happens is when i plug in the magsafe charger the light turns green (so one wire circuit must work somehow) but no video even on external Monitor and the fan starts to spin slowly until on 100%. What can i do?

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
2 Kommentare

Does it chime? Is there any USB activity? Have you tried removing the RAM and trying just one in alternative slots? Does it beep with no RAM?

von

There is no chime or beep with or without RAM. How can i measure USB activity?

von

Einen Kommentar hinzufügen

2 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste
Hilfreichste Antwort

Einstellungen

Sadly, this sounds like a failed CPU and/or PCH. This series uses a direct memory architecture from the CPU to the RAM slots and it uses the PCH to gain access to the other services of the system like the audio logic for the speaker.

Time for a new logic board ;-{

War diese Antwort hilfreich?

Ja Nein
Bewertung 2

2 Kommentare:

Well there was USB activity. I measured PP5V_S5 and it is shorted to ground. I saw corrosion at the SMC so i can maybe replace it. Is it that easy or does it have firmware?

von

The SMC chip does have microcode so you need to get one off of another MacBook Pro of the same series.

SMC does not deal with POST or any of the I/O data services. Measuring voltage at the USB port is just that the power output for USB devices its not data! You would need a storage oscilloscope to capture the data to then play it back so you could visually see it. Troubleshooting USB 2.0 Problems with Your Oscilloscope

von

Einen Kommentar hinzufügen

Einstellungen

That DC-in part was used for several years. So it being marked 2009 is just fine.

War diese Antwort hilfreich?

Ja Nein
Bewertung 2
Einen Kommentar hinzufügen

Antwort hinzufügen

benjemiah wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 3

Insgesamt: 66