Screen won’t work after replacement

Question

iPad Pro 12,9"

Hochleistungstablet von Apple herausgekommen am 11. November 2015. Model A1584.

131 Fragen Alle anzeigen

Maggie Phifer @maggiephifer

Rep: 1

Veröffentlicht: 9. Mai 2021

Einstellungen

Screen won’t work after replacement

I just replaced my screen after I shattered the entire lower half. My home button was destroyed in the process or when I broke the screen, not really sure. Well everything is put back together now and the screen won’t work. I know it’s “on” because when I plug it in it gives me the charging sound effect. I’m not really sure what I can do here. I can’t do a hard reset or even turn it off the regular way. It’s a huge bummer because other than the screen it was in perfect condition for almost 6 years old.

If anyone has any tips or ideas I would be greatly appreciative.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein

Bewertung 0

1 Kommentar

You could have knocked components off around the connector or blown a backlight filter. Shine a light on the screen and see if you can see the image.

9. Mai 2021 von daniel

Einen Kommentar hinzufügen

3 Antworten

You could have knocked components off around the connector or blown a backlight filter. Shine a light on the screen and see if you can see the image. — daniel

GHOST336 yt @ghost336yt Rep: 13 1 · Answer 1 · 2021-05-09T06:02:32-07:00

Hilfreichste Antwort

GHOST336 yt @ghost336yt

Rep: 13

1

Veröffentlicht: 9. Mai 2021

Einstellungen

More than likely the backlight filter. It's pretty common with screen replacements especially if you don't disconnect the battery prior to connecting and disconnecting the screen.

War diese Antwort hilfreich?

Ja Nein

Bewertung 1

1 Kommentar:

I did disconnect the battery and I can’t shine a light to it and see the screen. I’m going to try some of Steve’s suggestions and see how that goes.

9. Mai 2021 von Maggie Phifer

Einen Kommentar hinzufügen

Steve @ifixanything Rep: 169 3 1 · Answer 2 · 2021-05-09T06:18:22-07:00

Steve @ifixanything

Rep: 169

3

1

Veröffentlicht: 9. Mai 2021

Einstellungen

It maybe just needs a reset, home buttons can be replaced they will just operate at a home button without finger print feature, I suggest replacing home button then you can reset it easily.

if that does not fix then next step is to look at hardware make sure all plugs are not damaged and plugged in correctly and flex cables of new screen are not damaged.

if still not joy it could be faulty screen try another , did your old screen light up try it and see if it still lights up.

next step is logic board damage maybe back light this will require micro soldering to fix.

War diese Antwort hilfreich?

Ja Nein

Bewertung 1

Einen Kommentar hinzufügen