Zum Hauptinhalt wechseln

Guides and support for devices that play video from Blu-Ray Discs.

111 Fragen Alle anzeigen

Pioneer BDP-140 "UNK DISC" error

My Pioneer BDP-140 has worked flawlessly for around 8 years. However, lately when I insert CD-audio and DVD-video discs it just displays the message "UNK DISC" and refuses to play said discs (the discs do not even spin). Blu-ray discs playback is normal.

Some things I already tried with no success:

Loaded default settings

Firmware reflash (v1.20)

Firmware downgrades (v1.17, v1.10 and v1.08)

Replaced entire loader assembly

Any help would be greatly appreciated.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
2 Kommentare

@hp78 sounds like your laser cannot read your disks. clean the laser assembly and see if that helps or worst case scenario you may have to replace it.

von

Actually I already replaced the complete loader assembly, which includes the 2 lasers. However the player displays the exact same behaviour.

von

Einen Kommentar hinzufügen

1 Antwort

Hilfreichste Antwort

@hp78 that is a tough one since you already replaced the loader I would assume that the issue must then come from somewhere on the main board. I suggest you start with something like this Flowchart

Block Image

and go through those. Also, try the service mode and see if that shows you anything unusual. Pioneer BDP 140 Rrv4263

War diese Antwort hilfreich?

Bewertung 2

1 Kommentar:

Thank you for the answer.

I am thinking there may be a calibration issue with the new loader. Looking at the service manual, on the FA Mode section, it is requested that you insert a calibration disc "GGV1368", which I do not have of course.

Do you know how to find this disc? Or at least an image of it?

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Hugo Perez wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 18

Insgesamt: 875