Repariere deine Sachen Community Store

Veröffentlicht am 21. September 2018. Modelle A1921, A2101, A2102, A2104. Erhältlich als GSM oder CDMA / eSIM oder dual-SIM / 64, 256 oder 512 GB / Silber, Gold oder Space Grau (Ausgesprochen "iPhone 10s.")

376 Fragen Alle anzeigen

Einstellungen

Why does my screen go black randomly?

I recently replaced my broken screen on my iPhone XS Max with an IFixIt LCD screen. Since my phone screen was completely unresponsive to touch before replacing it, i wasn’t able to shut my phone down before repairing the screen. I just unplugged the battery connector and went on with the procedure. Now, randomly, my phone screen will go black while i’m using it but the phone is still on. All it takes to fix it temporarily is to turn the phone off and on. Now, is it because I unplugged the battery connector during the repair without shutting the phone down or is it a faulty screen? Please Help!!!!!

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 1
Einen Kommentar hinzufügen

2 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste
Hilfreichste Antwort

Einstellungen

Unplugging the battery connector would not have caused any damage. In your description you say it is an LCD screen and these can be problematic and you should have purchased an OLED screen. If it is an OLED screen I would back the phone up and do an update or restore and see if the problem persists, if it does you will need to return the screen for a replacement. Before you do though I would make sure the top flex connector on the screen is seated properly and if the screen is losing image or backlight, you can do this by shinning a torch on the screen and see if you can make out an image.

War diese Antwort hilfreich?

Ja Nein
Bewertung 1

3 Kommentare:

Hi @imicrosoldering

I thought OLED screens didn't have a backlight as the light comes from the pixels themselves, but I'm always willing to be corrected if I'm wrong ;-)

Cheers

von

@jayeff You are right Jeff. I was thinking if the ambient light sensor was playing up you should be able to see an image with a torch shined onto the screen.

von

@imicrosoldering

Learning all the time ;-)

Cheers

von

Einen Kommentar hinzufügen

Einstellungen

WAIT...unplugged the battery connector during the repair without shutting the phone down?!?!?!?

congrats< now you need to replace the battery because you messed up there.

and also did you transfer the data of the original iPhone screen? that could be a problem 2

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

1 Kommentar:

didn’t have to be crabby abt it lol. I explained why i couldn’t power the phone down. i think i might contact ifixit for a different screen before i replace the battery

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Nicholas Albensi wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 5

Letzte 30 Tage: 11

Insgesamt: 197