Repariere deine Sachen Community Store

Reparaturanleitungen und Informationen zur Demontage des MacBook Pro 16", das im November 2019 auf den Markt kam.

211 Fragen Alle anzeigen

Einstellungen

No power after screen replacement. Please help me find this part!

Block Image

I replaced the screen on a 16” 2019 model, and the last thing I had to do was connect the battery cable to the (7 pin ribbon cable connection on the logic board I believe) and the “pressure” clip broke off so I think that might be the problem. No connection? Where can I find this replacement part?

UPDATE:

Had a buddy microsolder a new one on, and it booted for one second then shut off and now no response. Any ideas? Could it be a bad connection? Or did we just fry the logic board?

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

2 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste

Einstellungen

You don’t need to replace the full connector, just the latch part. I would try to find it as it can be put back as it’s not uncommon to snap off.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

Einstellungen

cole Wengender the connector is a Fujikura/DDK FF14A-6C-R11DL-B-3H. You can get it on some places as a single item, others require you to buy at least 10. Do an online search with that number and see what will work for you. Then get yourself a few of those and gently lever one side, then the next side of the lock out of the connector. Transplant that lock to your connector.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

cole Wengender wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 6

Letzte 30 Tage: 12

Insgesamt: 93