Repariere deine Sachen Community Store

Das 13" MacBook Pro erschien im Mai 2020. Es ist ausgestattet mit einem Quad-Core Intel i5 oder i7 Prozessor der 8.Generation und Intel Iris Plus 645 integrierter Grafik. (Modell A2289/EMC3456 mit zwei Thunderbolt 3 Anschlüssen)

79 Fragen Alle anzeigen

Einstellungen

Battery not recognised but works unplugged.

Model: A2289 - MacBook Pro 13" Two Thunderbolt Ports 2020

Cycles: 5

Recently replaced battery with an iFixit one.

The system no longer recognises the battery (and coconutBattery shows NaN SoC), and sleeps when unplugged.

Tried SMC reset, PRAM/NVRAM reset, nothing. Assumed another battery failure.

Then tried disabling sleep entirely with the command

sudo pmset disablesleep 1

and now the MacBook runs perfectly fine on battery power, but the system still doesn't recognise the battery.

Has anyone encountered this issue before, or does anyone have suggestions on what else I can try?

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

Beginning at Step 9 of this guide you can see the battery data cable. Make sure that this was transferred over from the original battery to the replacement battery correctly. If this cable isn't properly installed the system will not recognize the battery properly. If you're certain that the battery data cable and the rest of the battery is installed correctly, then I would operate under the assumption that the battery you installed is faulty. Good luck!

War diese Antwort hilfreich?

Ja Nein
Bewertung 2

2 Kommentare:

Or the cable is damaged and needs to be replaced MacBook Pro 13" BMU Flex Cable

von

I just finished a battery replacement on an A1466 MacBook Air and ran into the same problem. Turned out the fix was as easy as opening it back up and reseating the battery connector; on the Air it's a single plug so it's not a one-to-one comparison, but essentially I just hadn't gotten it plugged in fully.

Once the plug was in all the way, everything started working like it should.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

dotxyz wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 5

Letzte 7 Tage: 8

Letzte 30 Tage: 66

Insgesamt: 66