Hello community,
I have an original controller from my Super Nintendo, but have been difficult to press the start button. Can it be a dirt difficulting the pressing, or can it be some problem?
Ist dies eine gute Frage?
Rep: 14,7 Tsd.
20
12
20
Hi!
I repaired many SNES controllers and this is 95% of the time due dirt.
Best thing to do is to open it up and clean the motherboard with isopropyl alcohol.
And I highly recommend to replace the rubbers as well, if you don't want to replace the rubbers, then clean them thoroughly.
If the rubbers have any tears, or when the rubbers are damaged, a replace is necessary.
Good luck!
War diese Antwort hilfreich?
Letzte 24 Stunden: 0
Letzte 7 Tage: 4
Letzte 30 Tage: 24
Insgesamt: 101
4 Kommentare
Does it still press?
von Hampter
Yes, but I need to press hard for it to work.
von Iago Puccini
If you have the tools you could dissassemble it (Super Nintendo Entertainment System Controller Teardown) and clean the board and button
von Hampter
Perfect, I'll make a clean and test it.
Thank you so much Hampter
von Iago Puccini