Hier findest du Antworten in diesem Dokument
Wir haben alle Seiten unter 21 gelesen, damit du es nicht tun musst. Frag einfach und erhalte jetzt deine Antwort.
MSI GT680(R)/GX680(R) (MS-16F2) Disassembly Guide
Solution Detail
GT680(R)/GX680(R) (MS-16F2) Disassembly Guide
- BATTERY PACK
2、BOTTOM DOOR ASSY
- HDD MODULE
4、THERMAL-KIT、CPU AND DRAM
-
ODD MODULE
-
SEPARATE UPPER CASE AND LOWER CASE
-
LOWER CASE ASSY
8、UPPER CASE ASSY
9、LCD MODULE ASSY
GT680(R)/GX680(R) (MS-16F2) Disassembly Guide
1、BATTERY PACK
| U↓ | 1.2: Release the "Release" button and move the battery pack base on left picture. | ||
| Component | P/N | Qty | |
| Battery Pack | S9N-3496200-M47 | 1 | |
GT680(R)/GX680(R) (MS-16F2) Disassembly Guide
2、BOTTOM DOOR ASSY
2.1: Remove the 2 screws (M2.5*7mm).
Attention: the screw driver touque is: 2.5-3.0 gf-cm
| Component | P/N | Qty |
| Screw | E43-1257002-G68 | 2 |
2.2: Remove the 6 screws (M2.5*5mm). Then remove the Bottom door.
Attention: the screw driver touque is: 2.5-3.0 gf-cm
| Component | P/N | Qty |
| Bottom door | 307-6F1J211-P89 | 1 |
| Screw | E43-1255001-H29 | 6 |
GT680(R)/GX680(R) (MS-16F2) Disassembly Guide
3. HDD MODULE
3.1: Remove the 2 screws (M2.5*5mm); then remove the two HDD Module according to the direction as pic shows.
Attention: the screw driver torque is 2.5-3.0 Kgf-cm
| Component | P/N | Qty |
| Screw | E43-1255001-H29 | 2 |
3.2: Remove the 4 screws (M3*3.5mm) that stabilize the two HDD bracket, then remove the HDD bracket.
Attention: the screw driver torque is 2.5-3.0Kgf-cm
| Component | P/N | Qty |
| Screw | E43-1303501-H29 | 4 |
| HDD Bracket | E2M-6F10611-C22 | 2 |
| HDD Module | S71-2450701-S70 | 2 |
GT680(R)/GX680(R) (MS-16F2) Disassembly Guide
4、THERMAL-KIT、CPU AND DRAM
O
4.1: Remove the 1 screw (M2.5*5mm) and FAN cable, after that remove the Fan.
Attention: the screw driver torque is 2.5-3.0 Kgf-cm
| Component | P/N | Qty |
| Screw | E43-1255001-H29 | 1 |
| FAN | E33-0800180-MC2 | 1 |
4 5 6 3 2 1
4.2: Remove the 3 screws (M2.5*5mm) and 4 spring screws, after that remove the two Heatsink. Attention: the screw driver torque is 2.5-3.0 Kgf-cm
| Component | P/N | Qty |
| Screw | E43-1255001-H29 | 3 |
| Heatsink | E31-0900332-TA9 | 1 |
| Heatsink | E31-0403231-TA9 | 1 |
4.3: Open the CPU Slot with Screw Driver, then remove CPU Module as below.
| Component | P/N | Qty |
| CPU | OA3-16F2010 | 1 |
GT680(R)/GX680(R) (MS-16F2) Disassembly Guide
4、THERMAL-KIT、CPU AND DRAM
AS.net AS.net AS.net
4.4: Push the two side shielding of RAM as pic shows; Then remove the RAM module
