Pixel 9 Pro XL Repair Manual V1.1
Pixel 9 Pro XL Repair manual
Version 1.1
Welcome
Welcome
Precautions
Introduction
Repair flows
Disassembly
Assembly
Troubleshooting
Testing
Google recommends that you seek professional assistance for all device repairs.
Self service repair isn't recommended unless you are an adult with the technical expertise to safely repair electronic devices. If you choose to perform self repair, you agree to assume the risk associated with such repair.
Use caution if you engage in repair.
Opening or repairing your device can present electric shock, device damage, fire, personal injury risks, and other hazards. Before you service the product, read the full set of precautions in this document.
Welcome! We are here
to help.
At Google, we innovate, design and build in order to create helpful and sustainable products. Product longevity is really important to us and repairability is part of that. Repair enables our products to stay in-use and out of landfills.
If you have any questions or need support, please reach out.
support.google.com
This manual is organized into sections for easy and intuitive navigation.
Precautions
Safety is a top priority for Google. Users should work in a safe environment and have the skills and training necessary to safely complete repairs.
Disassembly
Each section contains a list (in the order of device disassembly) of prerequisite steps, tools, fixtures, and parts required to complete the repair.
Troubleshooting and testing
Use the diagnostic steps and testing recommended in this section to identify the source of device problems and issues.
Repair flows
Here, we have a flow chart of the most efficient repair methods.
Assembly
For each disassembly, we provide a guide to reassembly. This may include rework steps for certain components.
Glossary
All the terms and acronyms you need to communicate with the same language to colleagues and customers.
Table of contents
Precautions
Electrical precautions
Battery conditions
Battery handling
Glass handling
Introduction
Expanded views
Screw map
Screen calibration
ESD protection
Liquid damage indicators
Turn Pixel on or off
Tools and fixtures
Replacement parts
Glossary
Repair flows
Disassembly order
Assembly order
Tools and fixtures
Laser product
Safety equipment
Disassembly
Display
BG sub
mmWave module
Jumpflex
ANT4 board
Logic board
Rear camera
Front camera
Top speaker
Battery
Chin board
Bottom speaker
Vibrator
Enclosure
Assembly
Enclosure
Vibrator
Bottom speaker
Chin board
Display
Battery
Top speaker
Rear camera
Logic board
ANT4 board
mmWave module
Front camera
Jumpflex
BG sub
Troubleshooting
Vibrator
Display
NFC
Proximity sensor
UDFPS
Rear camera
Front camera
mmWave module
Sensor and key feature location
Connectors Location
Power
Wireless Charge
Mic1
Mic2
Mic3
Top Speaker
Bottom Speaker
Useful link
Software tool s
Revision history
| Version | Date | Change description |
|---|---|---|
| V1.0 | July, 2024 | First release |
| V1.1 | August, 2024 | 1. Change display module picture. P24, P39, P169 2. Revise the films need to remove. P169 3. Add more detail about heating. P53 4. Add more detail about 3MAP111 applied. P155, P163, P175, P246, P251 5. Change align battery picture. P176 6. Modify the assembly method. P196, P217 7. Optimize the assembly method. P226. 8. Add more detail about BG sub film. P252 9. Revise heating adhesive condition. P136, P154, P157, P244 10.Revise clean residue area and note. P136, P216 11. Fix pictures to solve the mirrored problem when download PowerPoint. 12. Correct GPN from G806-11578-02 to G806-11578-00. P108 13. Add more detail when marking opening pick. P51 14. Revise use caution. P54 15. Revise disassemble direction. P45 16. Remove laser module statement. P7 17. Add assembly caution and picture. P238 18. Changed the wording for better understanding. P13 19. Revise mic1, mic2 and mic3 troubleshooting. P267, P268, P269 |
Table Caption: This table details the version history of a document, with V1.0 being the initial release in July 2024 and V1.1 in August 2024 introducing numerous changes including revised descriptions, added details on specific procedures, corrected part numbers, and updated images for clarity.
Pixel 9 Pro XL repair manual
Precautions
Page 1 of 2
Important: Before you begin
Be careful if you engage in repair
Opening or repairing a device could present electric shock, device damage, fire, personal injury risks, and other hazards.
Always perform repairs in a clean work space with good ventilation and no combustible materials.
Ensure that there are no additional screws or small parts left in the device after assembly.
Always ensure that screws are securely fastened.
Before you service the product, read the full set of precautions in this document.
Caution:
Batteries should be carefully handled, and could be dangerous when damaged
- Fully discharge the device battery before you attempt repair.
- Never bend, dent, puncture, or use tools to pry the battery.
- To prevent damage, store batteries in the replacement part packaging after removal as soon as possible.
- If a battery begins to vent, cover it in sand or use gloves and tongs to place the battery in a fire safe as soon as possible.
- Take care to prevent shorting of battery terminals or damage to the battery, as it could result in fire or overheating.
- Dispose of the battery according to local regulations.
Caution:
Pixel 9 Pro XL contains a class 1 laser module
The design of the device incorporates optics and protective housing such that there's no access to a level of laser radiation above class 1 during normal use or approved servicing.
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Page 2 of 2
Important: Before you begin
Caution:
Part handling - glass
- Wear protective gloves and safety glasses when you handle damaged parts.
- Use protective film when you remove damaged parts.
- After removal, store the damaged part in the replacement part packaging as soon as possible to prevent injury.
Tools and fixtures
The use of
