Studio Setup Guide

studio SETUP GUIDE

Studio

SETUP GUIDE

Notes, Notices, and Cautions

U

NOTE: A NOTE indicates important information that helps you make better use of your computer.

▶

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

△！

If you purchased a Dell™ n Series computer, any references in this document to Microsoft® Windows® operating systems are not applicable.

Information in this document is subject to change without notice.

© 2008 Dell Inc. All rights reserved.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, YOURS IS HERE, and DellConnect are trademarks of Dell Inc.; Intel, Pentium, and Celeron are registered trademarks and Core is a trademark of Intel Corporation in the U.S. and other countries; Microsoft, Windows, Windows Vista, and Windows Vista start button are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.; Blu-ray Disc is a trademark of the Blu-ray Disc Association; Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under license; Realtek is a trademark of Realtek Semiconductor Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

June 2008

Rev. A00

Contents

Setting Up Your Studio 540 .....5
Before Setting Up Your Computer .....5
Connect the Display .....6
Connect the Video Cable to the Display .....7
Connect the Keyboard and Mouse .....8
Connect the Network Cable (Optional) .....9
Connect the Power Cables for Your Display and Computer .....10
Windows Vista® Setup .....11
Connect to the Internet (Optional) .....11
Using Your Studio 540 .....14
Front View Features .....14
Back View Features .....17
Back Panel Connectors .....18
Software Features .....20

Solving Problems ..... 22
Network Problems ..... 22
Power Problems ..... 23
Memory Problems ..... 24
Lockups and Software Problems ..... 25
Using Support Tools ..... 28
Dell Support Center ..... 28
System Messages ..... 29
Hardware Troubleshooter ..... 30
Dell Diagnostics ..... 31
System Recovery Options ..... 33
System Restore ..... 33
Dell Factory Image Restore ..... 34
Operating System Reinstallation ..... 36

Getting Help .....38
Technical Support and Customer Service .....39
DellConnect™ .....39
Online Services .....39
AutoTech Service .....40
Product Information .....41
Returning Items for Repair Under Warranty or for Credit .....41
Before You Call .....42
Contacting Dell .....43
Finding More Information and Resources .....44
Specifications .....46
Appendix .....53
Macrovision Product Notice .....53
Index .....54

Setting Up Your Studio 540

This section provides information about setting up your Studio 540 and connecting peripherals.

Before Setting Up Your Computer

When positioning your computer, ensure that you allow easy access to a power source, adequate ventilation, and a level surface to place your computer.

Restricting airflow around your Studio 540 may cause it to overheat. To prevent overheating ensure that you leave at least 10.2 cm (4 inches) at the back of the computer and a minimum of 5.1 cm (2 inches) on all other sides. You should never put your computer in an enclosed space, such as a cabinet or drawer when it is powered on.