INSTRUCTION MANUAL MANUEL D'INSTRUCTION MANUAL DE INSTRUCCIONES
Rotary Hammer Marteau Perforateur Martillo Rotativo
HR4041C
IMPORTANT:
Read Before Using.
IMPORTANT :
Lire avant usage.
IMPORTANTE:
Lea antes de usar.
DOUBLE INSULATION
DOUBLE ISOLATION
DOBLE AISLAMIENTO
SPECIFICATIONS
| Model | Model | HR4041C |
|---|---|---|
| Capacities | Carbide-tipped bit | 40 mm(1-9/16") |
| Core bit | 118 mm(4-5/8") | |
| No load speed (RPM) | No load speed (RPM) | 230 - 460 /min. |
| Blows per minute | Blows per minute | 1,300 - 2,600 |
| Overall length | Overall length | 428 mm(16-7/8") |
| Net weight | Net weight | 6.7 kg (14.8 lbs) |
Table Caption: This table provides specifications for the Hitachi HR4041C rotary hammer, detailing its capacities for different bit types, no-load speed, blows per minute, overall length, and net weight.
- Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
- Specifications may differ from country to country.
- Weight according to EPTA-Procedure 01/2003
General Power Tool Safety Warnings
WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
Work area safety
- Keep work area clean and well lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical Safety
- Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
- Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
- Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
- Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
- When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
- If operating a power tool in a damp location is unavoidable, use a ground fault circuit inter -rupter (GFCI) protected supply. Use of an GFCI reduces the risk of electric shock.
Personal Safety
- Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a
