roomba_knowledge_4210.qxp 7/6/2004 9:02 PM Page 1

Ro mbar Knnwhakle

Battery Indicator

Bin Release Button

Edge-Cleaning Side Brush

Main Cleaning Brushes

Cliff Sensor Openings

Contact Point for Drive-on-Charger/ Charging Wall Mount

Brush Guard Release Buttons

Vacuum Inlet

Roomba Set-up

① Place battery into Roomba Robotic Floorvac.

(press down on both ends)

② Charge for 3 hours — while you're waiting, load batteries in your Virtual Wall and Remote.

①

Clean the floor of loose stuff like you would before using a traditional vacuum. If you don't vacuum over it, don't use Roomba over it (e.g., rug tassels, power and blind cords).

— | ○ — ◯ — ○ — ○ — ○ — ○ — ○ — ○ — ○ — | —

Roomba Set-up

4 Set up your Virtual Wall to keep Roomba where you want it and away from where you don't.

Shape of beam

⊕

⑤ Battery indicator

⊕

Color of Battery Indicator

氵氵

Pulsing Amber

Charging

Green

Fully Charged

Amber

Red

Partially Charged

Almost Fully Discharged

Flashing Red

Fully Discharged

— | ○ — ○ — ○ — ○ — ○

Roomba setup - Self-Charging Home Base

6 Set up the Home Base against a wall in a location with a clear approach and no obstructions in front.