Hier findest du Antworten in diesem Dokument
Wir haben alle Seiten unter 3 gelesen, damit du es nicht tun musst. Frag einfach und erhalte jetzt deine Antwort.
Caire SeQual Integra Compressor Intake Filter Service Bulletin
DATE: January 2, 2014
MODEL: SeQual Integra
ISSUE: Compressor Intake Filter – Incorporation of Velcro Strip
NOTES: Effective immediately, the SeQual Integra's Compressor Intake Filter (PN: SP4405-SEQ) will include a Velcro strip to better attach the filter to the unit. This design improvement was made to account for the slight difference in mating of the filter to the muffler assembly.
The Integra PM Kit now includes the Velcro strip and the kit can be ordered using PN: 4542-SEQ. Table 1 shows what's included in the Integra PM kit. The Compressor Intake Filter Bulk Pack (quantity 12) can be ordered using PN: SP2672-SEQ and will also include the Velcro Strips in it.
Table 1. Parts included with Integra PM Kit PN: 4542-SEQ.
| FILTER, CABINET INLET | 2185-SEQ $ ^{{*}} $ |
| FILTER, COMPRESSOR INLET | 4405-SEQ $ ^{{*}} $ |
| FILTER, HEPA | 2033-SEQ $ ^{{*}} $ |
| CABLE, TIE (2 Qty.) | 6968-SEQ |
| BATTERY, 9V ALKALINE | 8098-SEQ |
| VELCRO STRIP | B-776202-00 |
$ ^{*} $Use SP in front of PN if you are ordering the part separately.
The additional steps/modifications for installing the Velcro strip and filter to ensure the filter stays in place while using the concentrator can be found on the following pages.
Step 1. Open the Integra casing to service the air filter. Remove the old filter and discard. See below for the Muffler Assembly without Filter.
Step 2. Reverse the "nap" direction on the Bottom Velcro strap of the muffler assembly such that the Velcro loop material faces up.
