Epiphone Instruments Owner's Manual

Epiphane

The Epiphone Company

A Division of Gibson Musical Instruments

645 Massman Drive

Nashville, Tennessee

37210-3781 USA

For Your Records

Model ___

Serial No. ___

Date Purchased ___

Dealer Address ___

Dealer Phone ___

Remember to keep your purchase receipt. It is necessary for warranty coverage.

The Epiphone Story

Th Late named A York in se pany that The " Anastasi known as father so and the l After acquired in 1959. standards Today craftspeo

Late in the 19th century, a Greek luthier and violin maker named Anastasios Stathopoulo moved his family to New York in search of a better life. He found it - and built a company that became one of the greatest names in instruments.

The “House of Stathopoulo” was opened in 1873 and Anastasios brought his 17 year old son, Epaminodas (also known as “Epi”), into the company in 1910. “Epi” and his father soon named some of their new instruments Epiphone and the legend began.

After 47 years of Epiphone production, Gibson USA

・・・

"Epi" Stathopoulo

acquired the rights to the Epiphone name in 1957 and began to build Epiphones in 1959. Under the guidance of Gibson USA, Epiphone continued to set new standards for quality, value and innovation.

Today, with dedicated Epiphone engineers, product specialists, and skilled craftspeople at our facilities in Nashville, Tennessee, we continue to design and set

rigid quality and performance standards for each Epiphone instrument.

Every Epiphone employee is committed to producing the finest musical instruments available and ultimate customer satisfaction. Our Limited Lifetime Warranty $ ^{*} $ is a symbol of that commitment and your assurance that this Epiphone will give you years of trouble-free enjoyment.

Care Of Your Instrument

We recommend that you always keep your instrument in a case when transporting or storing it. This reduces the possibility of damage due to nicks and jams, and sudden changes in climate or atmosphere.

Carry the case with the lid towards your body. In the event that you have not properly fastened the latches and the case opens, the lid will fall against your leg and prevent the instrument from falling on the ground. Never put your instrument in the trunk of your car or place anything on top of it.

Perspiration can damage the finish of your instrument so always wipe down your guitar after playing or before storing with a clean soft cloth. Polishing it with some high gloss guitar polish or a good quality carnauba wax polish will prolong the durability of the finish.

Tuning Your Instrument

Many individuals have their own method of tuning their instrument. We recommend the following method. An Epiphone guitar is tuned to A-440; utilizing a tuning fork, electronic tuner or pitch pipe. The following chart shows how different instruments are tuned. The first string, for this purpose, is considered to be the smallest diameter. Tune the two outside strings first, then tune towards the center. This equalizes the pressure on the bridge and allows rapid

tuning. Check intonation.

Action Adjustment

Action is the distance that a string must be depressed before it meets the fret. Action measurements are taken in 64th's of an inch, and are calculated from the top of the 12th fret to the underside of the string. We set the action on all instruments at the factory to the optimum playability setting. On occasion, lower than standard settings are desired by the player. This can be achieved by adjusting the bridge studs (See Tune-o-matic Bridge). Lower than standard action can often result in "buzz" or "rattle". This is caused by the string vibrating against the fret. Buzz or rattle caused by lower than standard action is not considered a defect of the instrument.

All Epiphones are set at the 1st fret.

Treble strings are cut to 1/64" and the action progresses up to 2/64" on the bass strings.

Be sure that the truss rod is properly adjusted!

Trussrod Adjustment

All guitar necks are subject to great stress as a result of string tension, humidity or changes in climate. Occasionally there are times when the neck may need adjustment. The truss rod is adjustable at the headstock, using an allen wrench or an adjustment wrench.

NOTE: This adjustment should be performed periodically and only by qualified repair personnel. Over adjustment can result in damage to the instrument and will not be covered under warranty.

Intonation