Logitech PRO 2 LIGHTSPEED Setup Guide

PRO 2 LIGHTSPEED

SETUP GUIDE | 设置指南

G

G

logitech

G

🌙 📖 📖 📖

ENGLISH.....3
簡体中文.....12
繁體中文.....21
한국어 .....30

logitech Important Safety, Compliance and Warranty Information Informations importantes concernant la sécurité, la mise en conformité et la garantie

SETUP INSTRUCTIONS

1 A wireless receiver attached to the USB adapter can be found in the accessory box. Plug one end of the cable into your PC, and the other end into the USB adapter and receiver.

The receiver can also be used plugged directly into your PC. However, using the cable and adapter when in wireless mode is recommended and allows for better connectivity and easy access to the cable for recharging.

→

→

→

→

→

→

→

→

→

2 Turn mouse on via the switch on the bottom of the mouse.

PRO LIGHTSPEED

↓

4 To charge, disconnect the cable from the adapter and plug into the front of the mouse. Your mouse will operate in data-over-cable mode whenever it is plugged in directly to a PC. Full charge from empty requires around 2 hours plugged in to a PC USB port.

Tips:

Keep the mouse and receiver 2 m+ away from wireless routers or other 2.4GHz wireless devices to minimize environmental noise.

● PRO 2 LIGHTSPEED has a wireless range of up to 10 meters. To ensure optimal performance in noisy wireless environments, and to keep the charging cable easily accessible, it is recommended to keep the receiver within 20 cm of the mouse.