Battery Slice Setup Guide

Vejledning til opsatning af batteriskive

Installatiehandleiding batterijblok

Levyakun asennusopas

Guide d'installation de l'extension de batterie

Setup-Handbuch für die Slice-Batterie

Guida all'installazione del battery slice

Vodiè za podešavanje pomočnih baterija

Oppsettveiledning for batteri

Guia de configuração da bateria auxiliar

Guía de configuración de la batería laminar

Instruktion för inställning av externt batteri

กงขณฑะกฤษฯ ฯ

DELL

Battery Slice Setup Guide

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

△ CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Battery Slice Bottom View

1 2 3 4

1 AC adapter connector

2 battery-slice status LED

3 release lever

4 docking connector

Setting up Your Battery Slice

WARNING: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries. Using an incompatible cable or improperly connecting the cable to the power strip or electrical outlet may cause fire or damage the equipment.

CAUTION: Always use the Dell AC adapter that came with your computer. If you use any other commercially available AC adapter—or the AC adapter from earlier models of Dell computers—you may damage the battery slice or the computer.

△ CAUTION: Use the battery slice with your computer only. If you use a battery slice from other models of Dell computers you may damage the battery slice or the computer.

CAUTION: When you disconnect the Dell AC adapter cable from the computer, grasp the connector, not the cable itself, and pull firmly but gently to avoid damaging the cable. When you wrap the AC adapter cable, ensure that you follow the angle of the connector on the AC adapter to avoid damaging the cable.

1 Connect the AC adapter to the AC adapter connector on your computer.

2 Before you dock or undock your computer from the battery slice, save and close any open files, and exit any open programs.

3 Before you undock your computer, set your computer's power management settings so that it does not enter sleep, standby, or hibernate mode when you close (lower) the display:

Windows 7:

a Click Start→ Control Panel→ Hardware and Sound→ Power Options→ Change what closing the lid does.

b Under the When I close the lid drop-down menu, select Do nothing. Windows Vista:

a Click Start→ Control Panel→ Mobile PC→ Power Options→ Change what closing the lid does.

b Under the When I close the lid drop-down menu, select Do nothing. Windows XP:

a Click Start $ \rightarrow $ Control Panel $ \rightarrow $ Performance and Maintenance $ \rightarrow $ Power Options $ \rightarrow $ Advanced.

b Under the When I close the lid drop-down menu, select Do nothing.

Docking Your Computer to the Battery Slice

1 Follow the procedures in "Setting up Your Battery Slice" on page 3.

2 Turn over the computer and lower the battery slice until it clicks into place.

3 Flip the computer and power it ON.

Undocking Your Computer From the Battery Slice

1 Disconnect all the cables connected to the computer.

2 Flip the computer on its back.

3 Press the release lever and lift the battery slice from the computer.

→

Charging Your Battery Slice

You can recharge your battery slice independent of the computer using the AC adapter that shipped with your computer. A docked computer will also charge the battery slice.