Einfach vorher mit einem Föhn erhitzen und dann mit einem flachen Metalltool rund um den Rahmen gehen, um den Kleber zu trennen. Ansonsten kannst du auch das komplette Display mit einem glatten Klebeband abkleben, damit der Saugnapf evtl. besser hält.
Ich hab mal einen älteren iMac repariert, kann daher nicht genau sagen wie das bei dem Modell ist. Bei dem war es auf jeden Fall so, dass das Glas nur eingehakt und mit Magneten befestigt war, also gar nicht verklebt. Kann aber natürlich sein, dass die neuen verklebt sind.
Hat sich erledigt, falls noch jemand das Problem haben sollte: Schuld war die Frontkamera Einheit, diese hat zwar wenn es nachträglich erst angeschlossen wurde einwandfrei funktioniert, wenn es jedoch vor dem Start angeschlossen war hat es nicht funktioniert.
Could it be possible that the phone was in contact with water? Did you try cleaning the connector before reassembling the new camera part? Have you tried flashing another firmware?
I had exact the opposite problem a few months ago. Front camera was working fine, but Siri couldn't hear me. After replacing the front camera assembly everything was working fine again. Of course you should at first unplug it and plug it in again to see if this could be the problem, but most likely you damaged the flex cable a litte bit and have to change it. You can get those parts very cheap on ebay (for under 10$)
You can find lots of tutorials on youtube or xda, or, for example, on this site: http://www.karbi-tech.com/2015/04/how-to-flash-samsung-galaxy-s4-mini.html Be careful to chose the right firmware for your device.
Can you still boot to download mode or boot to recovery mode once again? If you get to download mode (by holding Volume Down, Home and Power keys at the same time) you could try reflashing the firmware without losing your data.
Already tried reassembling the display but still the same error, I can make it a bit better with white balance but still far from normal. Has anyone ever had the same problem or knows what to do?