Marshall

Hi, You will only be able to put a logic board from another MacBook Pro with the same series identifier (in your case MacBookPro10,1), which means you will not be able to put any newer in series wise. You will however be able to put a higher spec logic board within the series, for instance if you have the 2.4 GHz i7 you can place the 2.7 GHz i7 board in for an upgrade, or if you have 8 GB of RAM you could put in a board with 16 GB of RAM (note: it will cost more though). Just make sure it is the SAME identifier as your current MacBook Pro. I would suggest you by the board from ifixit: MacBook Pro 15" Retina (Early 2013) 2.4 GHz Logic Board OR MacBook Pro 15" Retina (Early 2013) 2.7 GHz Logic Board Either of these should work. (Going off the info you gave me, double check to be sure.) But if you want to save a buck, you can search eBay as well, but watch for scams.

The memory is soldered to the motherboard, and is therefore rendered un-upgradable. Sorry.

Hi @golfsilver2006 While it could be the battery, the watch vibrating when you touch the screen leads me to believe it might be the display. I would try, charge the battery for a while maybe even overnight. Then try to get the watch to turn on/turn off and see if there is any sign of life, vibration, sound if it is still connected to your smartphone you could try calling it and see if it rings. If you find something that makes you think it is on and working(when not charging) then it is the display, and you will have to replace it. Otherwise, replace the battery, if it still doesn't work replace the display. P.S. For next time, more information on when the issue started, things you(or someone else) did that might have caused it, etc. Would be very helpful when it comes to asking questions like this the more info the better. A good question should include these things. Background, when it started, what might have happened to cause it. The issue. The type of device. What you have tried, Everything is not a good...

You can do what David Slawinski said and pay someone to repair it for you, but you can also repair it yourself for much cheaper :) This video will show you how https://www.youtube.com/watch?v=ClSOlEdr... You will need a heat gun or hairdryer the part is below it comes with all the other tools you need For 7.85 inch: https://www.amazon.com/Atabletparts-Trio-Stealth-G4-MST-78541/dp/B00V2EBBWE For 7 inch: https://www.amazon.com/Screen-Digitizer-TRIO-STEALTH-G4/dp/B01DXIKWBM An old credit card can be helpful for prying the old glass off. If you think you will want to repair stuff in the future I would suggest a toolkit, this is the one I have: https://www.amazon.com/dp/B00VJYWRKW?ref... It is really nice, I fixit also makes some really good tool sets like this one: Essential Electronics Toolkit

If this is like what happened to me you should be able to see the home screen and pull down the status bar. If this is the case this answer will tell you how to fix it. The problem is that you somehow got rid of your launcher. Fix 1. very easy but will only work if you have cwm recovery or twrp installed if you don't know what this is you probably don't have it installed Go to this site http://opengapps.org/ and download the aroma version for your android place it on the sd card or internal memory using your computer. Then boot into recovery and start installing the open gapps zip you downloaded and during installation select custom then select to install google now launcher nothing else finish installing and reboot now it should work Fix 2. Download this if you are on android 4 or above: https://goo.gl/bEIA9E Download this if you are on android less than 4: https://goo.gl/0ieuWz Now make your way to settings in android 4 or above pull down the status bar at the top then click the little gear android less tha...

Here you go: Blackberry Z20 Leap LCD/Digitizer Replacement Replacement

Try cleaning the printhead To clean the printhead from the control panel 1. Load Letter, A4, or Legal unused plain white paper into the main input tray. For more information, see Load standard-size media. 2. Touch (right arrow), and then touch Setup 3. Touch Tools, and then touch Clean Printhead

It is most likely that the camera is damaged, but it could be the software to find out we can do a few tests. 1) how does this affect the picture is there a problem with focusing or is it a constant spot that is alway blurry if it is one spot that is always blurry it is probably the camera that is damaged 2) if it is a problem focusing, does this issue persist in a different camera app 3) do a factory data reset this will fix any software problem if you conclude that it is a damaged camera here is the part: http://www.etradesupply.com/oem-samsung-galaxy-s-duos-gt-s7562-rear-facing-camera.html and this video should help you with the repair: https://www.youtube.com/watch?v=WvrtIvAR...

I am pretty sure you could figure it out from the rear cover replacement guide, it looks like it is just two or so more screws then it comes off. The problem is going to be finding a replacement that comes as the whole unit not just the screen.

This Site has a good guide on how to fix your forgotten mac firmware password http://osxdaily.com/2015/01/28/forgot-mac-firmware-password-what-now/http://osxdaily.com/2015/01/28/forgo...-mac-firmware-password-what-now/

by a usb otg cable and plug in mouse