Diese Person hat ihr Profil noch nicht ausgefüllt.
Fragen
Hi, I done a housing replacement for an iPhone 7 but removing the sim try is very fiddly, the sim ejector does not sit...
Mehr erfahrenI have done many repairs before so I am not a total noob however I have just recently attempted to do a glass only screen...
Mehr erfahrenI have a relatively new battery on my iPhone 7 and it’s still at 100% of maximum capacity and it had very good battery...
Mehr erfahrenThe screen went black randomly although backlight was still working, I thought this was a screen problem so I replaced the...
Mehr erfahrenI know the finger print scanner will never work but I am unsure if the button will not work. If I get a replacement home...
Mehr erfahrenI bought an iPhone 7 with a broken screen and after I replaced the screen the home button and the earpiece and front...
Mehr erfahrenAfter screen replacement my screen won’t turn on. The phone was switched of and the repair was done. When the new screen...
Mehr erfahrenThere is an invisible bar down the left side of me phone which I can’t tap on so the ‘p’ on my keyboard doesn’t work and...
Mehr erfahrenI have an iPhone 6s battery and I have an iPhone 6 could I use the 6s battery for my 6
Mehr erfahrenThe screen is popping out at where the volume and mute buttons are after a screen replacement.
Mehr erfahrenSeite 1 von 2
Forum
Look at the original screen and bend the cable in the exact same way. The original should have same sized cable but it’s usually bended in a way for it to fit in flush.
Mehr erfahrenMy guess here is you have damaged the microphones in your phone which is easily done as they are so delicate. Try replacing them and your problem will be fixed.
Mehr erfahrenUse the official Apple cable if you still have it, or borrow one from a friend as the cable is usually responsible for error 9 to occur If that doesn't work, it might also have something to do with the IPSW you are trying to restore with. Try using a different IPSW or using Redsn0w to boot Pwned DFU mode and restore it like that. Error 9 can be related to the RAM disk kernel rejecting the ASR because it is not signed properly, thus breaking the connection with the device and causing error 9.
Mehr erfahrenDid you disconnect the batter before repair and connect the battery last after the repair? This can happen if you have damaged the home button flex. Maybe the first screen was faulty but when transferring components to the new screen then you may have damaged it the home button flex. Another reason could be you somehow damaged the battery when repairing the screen however that isn’t very likely to happen.
Mehr erfahrenThe cover is for protection and slightly makes it sounds better if you take off the cover you won’t notice much change but will have to be careful to not damage it
Mehr erfahrenMaybe a problem with the motherboard. If you have warranty try sending it pack to Sony.
Mehr erfahrenYes it will fix it if it’s not a faulty screen but a logic board will cost you as much as a new phone better off getting it repaired from a place that offers micro soldering or just buying a new phone.
Mehr erfahrenFirstly when you buy a screen it will come with both the screen and digitizer. Which is fine and you can easily assemble this into the phone, if you replace with a LCD instead of OLED then you will notice a change as the LCD is not as sharp as OLED and the LCD also uses a backlight which OLED does not
Mehr erfahrenDid you fix the phone then update? This can cause the phone to brick. If the phone is working then you either damaged the screen during the repair or the screen was already faulty
Mehr erfahrenThe new logic board can be iCloud unlocked and network unlocked although you would need to check which board you are buying. I would recommend selling your phone for parts and buying a new phone as a logic board would cost as much as buying a new phone.
Mehr erfahrenSeite 1 von 5
Haris
@harisahmed123
415
Reputation
47
Lösungen
0
Anleitungen
Mitglied seit 08/16/17
Stimmen
1
0